WTS 6 and 6.5 Grendel uppers.

[MallardAddict]

I have both 6.5 Grendel (marked 264 LBC) and 6 Grendel (marked 6 Predator) uppers for sale. They share a bolt so want to keep them together. Sub 300 rds fired through both and as I recall both were very accurate. Just don’t shoot them.

Both are generic Mil-Spec uppers with 20” Ar Performance 1:8 barrels threaded 5/8x24. Both have 15” Diamondhead free float handguards.

-(1) ARP bolt
-(1) Rainier Arms labeled Raptor charging Handle
- Redding 6.5 Grendel FL bushing sizer with proper bushings for both calibers.

6.5 upper is on the bottom and both will ship as shown.

$800 shipped.

 

[Lwilliams]

Why 1/2x28 and not 5/8x24 since they are over the .224 bore size?

 

[MallardAddict]

Why 1/2x28 and not 5/8x24 since they are over the .224 bore size?

They are 5/8x24. I was thinking of a different barrel I have. I will edit the ad.

 

[MallardAddict]

Bump

 

[jzeblaz]

Is the 6 Grendel the same as the 6 ARC?

 

[MallardAddict]

Is the 6 Grendel the same as the 6 ARC?

The 6mm ARC is the saami version of the 6 Grendel. Shortened a tiny bit to better use 100+ gr vld bullets.

6 grendel brass is just 6.5 grendel brass run through a smaller bushing and load it.

The bushings needed for both 6 and 6.5 grendel are included. Buyer just needs a seating die as I used my rcbs comp seaters for both uppers.

 

[jzeblaz]

Gotcha, thanks. I haven't heard of that until today. GLWS.