6.5CM using 130gr Berger VLD

Pdog06

Lil-Rokslider
Joined
Feb 25, 2021
Messages
218
Location
Kirkwood Pa
Anyone running the Berger 130 Hunting VLD’s in their 6.5CM?

So I just ordered some and will be using h4350 and LR primers. Gun is a CA Mesa w/a 22” barrel.

Looking at various load data ranges I’ve seen some charge differences among manufacturers. Like Nosler shows a range of 39-43grs but Hodgdon shows a range of 35.2-39.2grs….so one’s starting point is the others max load? The only differences between the two is the Hodgdon shows a match primer and bullet seated deeper, so I assume it would get more pressure sooner? Both state using a 130AB.

My question is do these sound correct? Anyone running this bullet/powder combo and if so what’s your recipe?

I know start lower and work up….etc. not new to reloading at all. Just looking for more info before a start any load testing.
 

Attachments

  • 9D466462-6146-4953-A4A6-9F17CF5424DE.jpeg
    9D466462-6146-4953-A4A6-9F17CF5424DE.jpeg
    200.4 KB · Views: 38
  • A4D4AAA8-A8D2-439A-8027-F5E8417A045D.png
    A4D4AAA8-A8D2-439A-8027-F5E8417A045D.png
    158.9 KB · Views: 33

SouthPaw

WKR
Joined
Apr 10, 2014
Messages
830
Location
Northern CA
Email the contact on the Berger website and they'll send you the load data.

Sent from my SM-G950U using Tapatalk
 

sram9102

WKR
Joined
Oct 31, 2018
Messages
1,034
Location
IN
I have shot a ton of the VLDT over 42.8 grains of 4350. 2700 out of a 20" tikka.
 
OP
Pdog06

Pdog06

Lil-Rokslider
Joined
Feb 25, 2021
Messages
218
Location
Kirkwood Pa
Thanks for the info..

I did email Berger and got a response very quickly with their load data. Doesn’t show H4350 but some of the other powders are close to what is shown on the Nosler data sheet.

Here it is for anyone else interested:
 

Attachments

  • 4630C09B-ADFC-4026-8040-52F48E81CD76.jpeg
    4630C09B-ADFC-4026-8040-52F48E81CD76.jpeg
    664.9 KB · Views: 136

Lawnboi

WKR
Joined
Mar 2, 2012
Messages
8,353
Location
North Central Wi
Iv loaded for a number of 130s in the creedmoor and normally 42-43 grain of h4350 is about where I ended up.

As always, work up.
 
OP
Pdog06

Pdog06

Lil-Rokslider
Joined
Feb 25, 2021
Messages
218
Location
Kirkwood Pa
Yep. That seems to be what I’m seeing from what I could find doing online searches.
 
Joined
Dec 28, 2019
Messages
1,855
I load the 130 grain Berger OTM Hybrids over Superformance and get bug holes 2850 FPS 24” barrel Tikka. 45.8 grains of Superformance
 

Attachments

  • CD3FC6E9-4D38-4671-BCBB-C96000DD419D.jpeg
    CD3FC6E9-4D38-4671-BCBB-C96000DD419D.jpeg
    278.6 KB · Views: 36
OP
Pdog06

Pdog06

Lil-Rokslider
Joined
Feb 25, 2021
Messages
218
Location
Kirkwood Pa
Thanks. Figured it out a while ago.

After testing I Settled on 41.5gr of H4350 with the 130vld-h Bergers seated at mag length. MV was 2735. Groups avg 1/2-3/4 if I can keep that Mesa pencil barrel cool.
 
Top