338 Suppressor options and feedback

Mike D Texas

Mike D Texas

WKR
Joined
May 16, 2021
Messages
1,979
Location
North Texas
I’m in the market for a 338 suppressor. This will be used on a 22” 338 NMI, 28” 338 NMI and a 32” 33XC.

I’ve been looking at the following:

  1. YHM Bad Larry (don’t laugh, it gets good reviews). $799 + $75 DT 3/4-24 HUB mount. 1.7 OD, 7.375” L, 17.1oz. Doesn’t specify if rated for 33XC.
  2. Dead Air Nomax 33. $1199 1.75 OD, 9.3” L, 14oz with mount. Says rated for 33XC.
  3. KGM R338. $1289 1.875 OD, 9.1” L, 19 oz. Website doesn’t mention it but AI says rated for 33XC. Tunable gas relief ports.
  4. TBAC 338 Ultra Gen 2. $1930. 1.875 OD, 10.4” L, 17.2oz. Doesn’t say rated for 33XC but AI says it is. This one really isn’t an option for me right now due to cost but if it’s THAT much better than the others, I’ll save a little longer or sell some stuff. I also would have to buy 2 additional BA brakes at $140 each, whereas the others are direct thread.
I’m currently leaning toward the KGM but I’m not really familiar with that company.

Any experience/feedback would be appreciated.

@Formidilosus?
 
If you want the TBAC look for a match prize table 100% off cert for sale. I’ve bought em them as low as 1k and you can use them on any can but the 50 cal. You do have to wait for them to make it. My 338 Ultra Gen 2 was forecasted about 6 months. That’s how I bought mine as well. Something to think about.


Sent from my iPhone using Tapatalk
 
I think it is also worth looking at the .375 AB Raptor 10. I’ve never used it on a .338, but I think it is worth considering as an option.
 
my TBAC 338 SR Gen 1 is stupid quiet. Of course, the newer version was introduced just after I received my 338 SR. Zero point of impact shift if I did my part.

People at the range always have that Wow look when they ask what caliber your shooting. I would usually ask them, would you like to hear it unsuppressed?

I would go Thunderbeast if you can.
 
TBAC 338 ultra is CRAZY quiet.

It’s big but it makes shooting my 300nmi with 245s very similar to my 7saum with my Dominus. Maybe more recoil, maybe not. Close enough where it’s hard to tell, but it’s significantly quieter.
 
I only have experience with the TBAC 338 Ultra. I have nothing but good to say about it.

Regarding mounts, just go with the Area 419 system and you’ll save $$ over the BA mounts. I suppose you could also just rocksett a BA brake in the can and turn it into a direct thread (that’s what TBAC does on the DT models).
 
Another vote for the tbac 338 ultra. My wife prefers to shoot my 338 rum with the 338 ultra over a 270 win with a dd lti. That’s saying something.
 
Mike D Texas said:
I’m in the market for a 338 suppressor. This will be used on a 22” 338 NMI, 28” 338 NMI and a 32” 33XC.

I’ve been looking at the following:

  1. YHM Bad Larry (don’t laugh, it gets good reviews). $799 + $75 DT 3/4-24 HUB mount. 1.7 OD, 7.375” L, 17.1oz. Doesn’t specify if rated for 33XC.
  2. Dead Air Nomax 33. $1199 1.75 OD, 9.3” L, 14oz with mount. Says rated for 33XC.
  3. KGM R338. $1289 1.875 OD, 9.1” L, 19 oz. Website doesn’t mention it but AI says rated for 33XC. Tunable gas relief ports.
  4. TBAC 338 Ultra Gen 2. $1930. 1.875 OD, 10.4” L, 17.2oz. Doesn’t say rated for 33XC but AI says it is. This one really isn’t an option for me right now due to cost but if it’s THAT much better than the others, I’ll save a little longer or sell some stuff. I also would have to buy 2 additional BA brakes at $140 each, whereas the others are direct thread.
I’m currently leaning toward the KGM but I’m not really familiar with that company.

Any experience/feedback would be appreciated.

@Formidilosus?
Click to expand...

I have not used the YHM, it’s been a while on the KGM, and not sure by side with the TBAC.

Out of those, the best bet will be the TBAC.
 
You must log in or register to reply here.

Latest posts

Featured Video

Latest Articles

Back
Top