TL Technologies Hunter long action - upgraded to a 28# firing pin spring; lugs and receiver face lapped
Brux #5 barrel; 10 twist; 22" long, measures about 0.74" at muzzle
Threaded 5/8-24
Gen2 Shot caller brake
Manners EH1 with M5 bottom; fitted with an unknown brand AICS bottom metal
Stock has pillars and is bedded
3rd Accurate mag
BnA TacSport Trigger
rifle with brake, rail, empty mag should weigh sub 8# (as it sits, it weighs about 10.3#)
*the rail was cut to allow the scope to be mounted far enough back for me. I cut about an inch off the front of the rail, even with the recoil lug now
This is throated for a 230 eldx 20 thou off the lands.
Only about 150 rounds thru the barrel
Have formed brass, a modified case for the oal gage, Whidden dies and I'll include the neck bushing and a 332 expander mandrel if you'd like.
Rifle, brass, dies for $1700 PLUS SHIPPING
I also have just shy of 500 230gr ELDX that could be included for additional $$$









Brux #5 barrel; 10 twist; 22" long, measures about 0.74" at muzzle
Threaded 5/8-24
Gen2 Shot caller brake
Manners EH1 with M5 bottom; fitted with an unknown brand AICS bottom metal
Stock has pillars and is bedded
3rd Accurate mag
BnA TacSport Trigger
rifle with brake, rail, empty mag should weigh sub 8# (as it sits, it weighs about 10.3#)
*the rail was cut to allow the scope to be mounted far enough back for me. I cut about an inch off the front of the rail, even with the recoil lug now
This is throated for a 230 eldx 20 thou off the lands.
Only about 150 rounds thru the barrel
Have formed brass, a modified case for the oal gage, Whidden dies and I'll include the neck bushing and a 332 expander mandrel if you'd like.
Rifle, brass, dies for $1700 PLUS SHIPPING
I also have just shy of 500 230gr ELDX that could be included for additional $$$









Last edited: