TL Technologies Hunter long action - upgraded to a 28# firing pin spring; lugs and receiver face lapped
Brux #5 barrel; 10 twist; 22" long, measures about 0.74" at muzzle
Threaded 5/8-24
Gen2 Shot caller brake
Manners EH1 with M5 bottom; fitted with an unknown brand AICS bottom metal
Stock has pillars and is bedded
3rd Accurate mag
BnA TacSport Trigger
This is the round based off the 270win case.
rifle with brake, rail, empty mag should weigh sub 8# (as it sits, it weighs about 10.3#)
*the rail was cut to allow the scope to be mounted far enough back for me. I cut about an inch off the front of the rail, even with the recoil lug now
*also, there are a couple scratches under the barrel engraving on both sides, not sure how they got there, I believe they've been there since it came back from the smith, barely see them while in the stock
This is throated for a 230 eldx 20 thou off the lands.
Only about 180 rounds thru the barrel
Have formed brass, a modified case for the oal gage, Whidden dies and I'll include the neck bushing and a 332 expander mandrel if you'd like.
Rifle, brass, dies for $1500 Split Shipping
Barreled action, trigger, dies, brass for $1050 split shipping
Stock not for sale til barreled action sells, it'll come with the bottom metal and mag
I have about 400 230gr ELDX and the DMR2 (and 5+# of RL17 if you're semi local) that could be included for additional $$$
Some recent load testing with RL17 and 230grain ELDX
64 grains - avg 2748fps; es 22; sd 10
64.5 grains - avg 2774; es 18: sd 7
64.7 grains - 2789; es 8; sd 4 (maybe some early signs of pressure), accuracy opened up a bit
Brux #5 barrel; 10 twist; 22" long, measures about 0.74" at muzzle
Threaded 5/8-24
Gen2 Shot caller brake
Manners EH1 with M5 bottom; fitted with an unknown brand AICS bottom metal
Stock has pillars and is bedded
3rd Accurate mag
BnA TacSport Trigger
This is the round based off the 270win case.
rifle with brake, rail, empty mag should weigh sub 8# (as it sits, it weighs about 10.3#)
*the rail was cut to allow the scope to be mounted far enough back for me. I cut about an inch off the front of the rail, even with the recoil lug now
*also, there are a couple scratches under the barrel engraving on both sides, not sure how they got there, I believe they've been there since it came back from the smith, barely see them while in the stock
This is throated for a 230 eldx 20 thou off the lands.
Only about 180 rounds thru the barrel
Have formed brass, a modified case for the oal gage, Whidden dies and I'll include the neck bushing and a 332 expander mandrel if you'd like.
Rifle, brass, dies for $1500 Split Shipping
Barreled action, trigger, dies, brass for $1050 split shipping
Stock not for sale til barreled action sells, it'll come with the bottom metal and mag
I have about 400 230gr ELDX and the DMR2 (and 5+# of RL17 if you're semi local) that could be included for additional $$$
Some recent load testing with RL17 and 230grain ELDX
64 grains - avg 2748fps; es 22; sd 10
64.5 grains - avg 2774; es 18: sd 7
64.7 grains - 2789; es 8; sd 4 (maybe some early signs of pressure), accuracy opened up a bit
