300 wsm 200.2 loads

[Jmort1754]

Staball 6.5

Anyone have some load data

I can go to 2.98 overall length

 

[doverpack12]

I’m using H4350 with 200.20x. I have two nodes about 150 fps apart.
Factory Tikka Superlite barrel cut to 20” with lower node 61.6 gr is 2715 fps and covers my needs so I run it there. 4 shots in the picture below, 1/2” dot.
2.2485” ogive which is 3.040” or just a few thousands under. I use the Hells Canyon mag for these, fits with room to spare. I’m about 0.060” off the lands but they were not picky. I shot 15, 30, 45 and 60 off, they all generally shot with a slight preference to 60.



Factory Tikka Superlite barrel cut to 20” with higher node 64.3 gr is 2847 fps shoots as well when I do my part.

RL16 might get more velocity than my loads but I had and use H4350 with several other rifles.

I did load this rifle with 6.5 Staball and Superformance using the Hammer 160 gr Tikka bullet and had incredible velocity, ok accuracy.
I now have a 154 Hammer HHT with H4350 load for close distance less than ideal shot angles.