300 prc

[Jmort1754]

Anyone have any pet loads ? Just as soon not shoot the factory eldx

 

[Chainsaww]

Looking for the same.

 

[KChunter71]

How do you like the round?


Sent from my iPhone using Tapatalk

 

[Pengilly]

Im working with RL33 right now. when I have this sorted out Ill report back. 215 and 230s

 

[8nbait]

215 berger at .030 jump
Fed 215 primer
H1000 powder
77.5-78 is 2900 FPS, accurate load
79.5-80 is 2990 FPS also accurate load
26” barrel.

76 and 78 of RL26 were also accurate with CCI 250 primers.

No pressure signs with any of these in my gun but, Obviously work up slowly in your rifle.

 

[Northwinds308]

Following, I'd like to see some loads as well. Anyone trying the 200 grain LRX?

 

[UpNorth89]

215 Berger
10 thousandths off
81 grains of H-1000
Fed 215
1/2 moa at 2940 out of 26" barrel

Sent from my Moto Z (2) using Tapatalk

 

[Vandy321]

1000+ posts on 300 PRC load data... for your viewing pleasure.

Forum list

Sniper's Hide Forum

forum.snipershide.com

 

[Rooster22]

Anyone have any pet loads ? Just as soon not shoot the factory eldx

Any particular reason you don't like the eldx?

 

[Rooster22]

Anyone shooting the 300 prc with a proof carbon barrel and defiant action, thinking about building one and curious if anyone else has that setup

 

[Jmort1754]

Any particular reason you don't like the eldx?

Yeah I hit my bull this year 3 times 240
Yards and in. 1st shot broke on side shoulder no exit, second shot behind shoulder, no exit, 3rd shot when he was still flopping around through top down in no exit. Factory precision hunter.
Bullet that was recovered was only the jacket.

 

[Low_Sky]

Yeah I hit my bull this year 3 times 240
Yards and in. 1st shot broke on side shoulder no exit, second shot behind shoulder, no exit, 3rd shot when he was still flopping around through top down in no exit. Factory precision hunter.
Bullet that was recovered was only the jacket.

So much for that interlock ring holding them together at high velocity, huh? How fast were those pills moving when they hit?

 

[Jmort1754]

I’m not sure. Ranged at 240 yards. MV was around 2790-2800.
Dead bull yes
Would I shoot them again? Not a chance on an animal.
They are accurate as all get out however.

 

[Rooster22]

Yeah I hit my bull this year 3 times 240
Yards and in. 1st shot broke on side shoulder no exit, second shot behind shoulder, no exit, 3rd shot when he was still flopping around through top down in no exit. Factory precision hunter.
Bullet that was recovered was only the jacket.

Thats the second report I've heard of them not staying together

 

[Unknown Munitions]

We've taken the new ADG 300 PRC brass up to 80 grains of H1000 with 215 Hybrids and no pressure signs. It is performing fantastic so far. No data yet on reload count but the consistency is on point. The 245 Bergers shot a 3 round group into one hole from the test rifle at 2825 F/S

 

[Onstep]

I’m not sure. Ranged at 240 yards. MV was around 2790-2800.
Dead bull yes
Would I shoot them again? Not a chance on an animal.
They are accurate as all get out however.

So what's the answer for the crowd who wants a hunting bullet that can do it all? I'm curious as I think I know.... maybe...

 

[Jmort1754]

I’m not sure....

The edge tlr performed well out of 300 wsm.
I want penetration