277 Fury load data

[Remington1]

Just purchased a Seekins PH3 in 277 Fury. Looking for load data to hand load my own. 20” barrel with 1:8 twist. Wanting to load either Nosler 150 ABLR or Nosler 165 ABLR bullets.

 

[A382DWDZQ]

You should be able to use something between 6.5MCM and 7-08 starting loads. It’s pretty much right between the two.

 

[Smithb9841]

Would be interested to see how this goes, if you have time post up what you try and what works.

I’ve been kicking the idea around of a 277 fury.

 

[z987k]

Just purchased a Seekins PH3 in 277 Fury. Looking for load data to hand load my own. 20” barrel with 1:8 twist. Wanting to load either Nosler 150 ABLR or Nosler 165 ABLR bullets.

In brass or steel? What powders do you have?

 

[Remington1]

I will update what I come up with. I am using the hybrid case. Steel head and body is brass. I have most IMR/Hodgdon and Alliant powders that I have accumulated over 35 years of reloading.

 

[z987k]

I will update what I come up with. I am using the hybrid case. Steel head and body is brass. I have most IMR/Hodgdon and Alliant powders that I have accumulated over 35 years of reloading.

Lever evolution will be best for speed. RL17 is right up there as well.
I'm not going to post my actual data, because it's not possible to say start X and work up because there are no pressure signs, so you'll have no idea where you are without a pressure transducer, or I guess second best use a chrono and software to figure out a ballpark of where you probably are.