$2500 Western rifle, what?

PNWGATOR

WKR
Shoot2HuntU
Joined
Oct 14, 2014
Messages
2,744
Location
USA
SMH…the Havak isn’t ‘it’ unless you insist on a 700 platform.

FWIW I’d recommend spending a few extra bucks and getting a Blaser.
 

Macintosh

WKR
Joined
Feb 17, 2018
Messages
2,774
2500 gets you your choice of several actions, a barrel, trigger and stock. Bam, a more or less custom gun. And, if youre lucky it’ll shoot a tiny increment better than any of several factory guns that cost less than half that much. At some point the guns are all very good and its just a placebo. Id pick a factory rifle you like in a common cartridge that doesnt have excessive recoil, spend more time, effort and maybe even $ on the glass than the gun, and agonize over your tags.
 
Joined
Feb 24, 2016
Messages
2,596
Used Browning X-Bolt and a decent scope. Under $1500 and take your wife on a short weekend $1000 trip for brownie points.

OR

For $1250 you can have something like this complete setup in 7mm-08. Should last a lifetime and has next to 0 recoil surprisingly with 139 grain bullets.....

IMG_9043.jpg
 
Joined
Feb 5, 2014
Messages
1,437
Location
Tulsa Ok
I'll parrot the PH2(Seekins Havak) For $1900 it's a pretty decent gun. I have one that is a few years older with a Timney and I've never once had an issue with the trigger or felt the need to adjust. It's been a dang good rifle and by far the most accurate I have had at this point, although my sample size isn't that large. You should at least try and handle one before you make the call.

spartan.jpg
 

TN2shot07

WKR
Joined
Dec 19, 2020
Messages
671
Not voting with the RS contingent.

Depending on the cartridge, if I was dropping $2,500 right now I’d consider the new 700 alpha, Mark V backcountry, or fall back on a model 70 all weather.
 

OneShot

WKR
Joined
Jun 19, 2019
Messages
307
If you live close to a Scheels, might try to get one of these delivered from another store. Pretty good deal on a havak83FC3916-9050-430E-A5BE-5D040AB7A79C.png
 
Last edited:

rsipes3

FNG
Joined
Dec 23, 2023
Messages
60
i was looking at the browning x bolt mountain pros before i decided to build my own custom rifle, i still might buy one later i think the weight and performance is pretty good for the money.
 

ljalberta

WKR
Joined
Dec 7, 2015
Messages
1,689
Tikka, Rokstok, cut and thread the barrel for a suppressor, get the action milling to shave some weight, and you’re sitting pretty darn good for sub $2,500.
 

Weldor

WKR
Joined
Apr 20, 2022
Messages
1,848
Location
z
OK, I'll bite. My Fierce Carbon CT 6.5 prc 5.8 lbs, great for the money. Does everything as advertised. Ok, let the bashing begin. By the way the Canadian Fierce is a Sako copy and smooth as glass with the long action PRC . Fits those 156 's just fine.
 

JakeSCH

WKR
Joined
Jun 14, 2020
Messages
1,002
Location
San Diego, CA
I would save a bit more and get an unknown tikka build.

 
Joined
Aug 23, 2014
Messages
5,395
Location
oregon coast
$2500 budget for a western rifle. What is it and what caliber. $2500 for just the gun.
For a turn key no aftermarket changes I would get a seekins, if you may want to change something, a tikka.

If you don’t want to add any muzzle device, 6creed, if you want to add suppressor, 6.5prc

The prc isn’t bad without a muzzle device, but tough to spot your own shots
 
Joined
Jan 2, 2024
Messages
35
Location
Montana
I recently answered this very question for myself. Ended up with a Seekins PH2 in 7PRC. The element is similar but lighter, shorter barrel, and more expensive. Either Seekin’s rifle would serve you well and are in your price range. I chose the PH2 because I actually wanted the extra weigh for recoil reduction, longer barrel for speed, and lower cost to afford a Swarovski scope.
 

thinhorn_AK

"DADDY"
Joined
Jul 2, 2016
Messages
11,234
Location
Alaska
I recently answered this very question for myself. Ended up with a Seekins PH2 in 7PRC. The element is similar but lighter, shorter barrel, and more expensive. Either Seekin’s rifle would serve you well and are in your price range. I chose the PH2 because I actually wanted the extra weigh for recoil reduction, longer barrel for speed, and lower cost to afford a Swarovski scope.
My plan was to get an element in 6.5 creedmoor and a ph2 in 300 win mag for the reasons you listed (other than barrel length on the ph2). I got the 6.5 creed but I decided to get completely out of the 300 win mag game. Sold my last 300 and most of my reloading supplies for it. If I add another cartridge it would probably be that 7prc.

I took the 6.5 out to sight it in and the first group I shot with my hand loads (140g eldm/h4350) made a 5 shot group I could cover with a quarter (off the bench of course).

I’m honestly not worried about the trigger, I’ve used timney and trigger techs and everything else out there for years with no issues, I’m not saying they are perfect and can’t fail but I just havnt seen it happen.
 
Top