25-7prc load thread

[blacktailcentral]

Hey all starting load development on a 25-7prc. Was wondering what neck bushing everybody is using, wto has a few different numbers on their site. As well as powders/charge weight that yall have had luck with.

 

[Karl B]

WTO sells ready to rock ADG. That would be my go to if starting over. Wasn't an option at the time so I had to neck down 7prc.

I personally did 3 steps. I had the bushings and I hate ruining brass.

.298
.288
.281

bring it back up with a .2560 mandrel. Didnt lose a single piece.

n570 is gonna be your speed king. Start around 66.5gr and work up.

 

[blacktailcentral]

I bought one box of the already sized down and head stamped brass. Their site had some variance on the neck bushing size but called today and they confirmed .281. Going to start at 66gr then 67gr n570 with the 134gr eldm

 

[blacktailcentral]

Shot the first rounds out of the 22” pbb barrel today with the 134 eldm
66gr n570 average 2976fps
67gr n570 average 3020 fps

Hoping to get a bit more speed but the bearing surface of the eldm always makes them slow!