25-06 short barrel specs

[khuber84]

I understand the concepts but don’t have the knowledge to know the actual numbers and measurements I would need for throating for the 134’s. Your opinion is the saami chamber is sufficient?

SAAMI, no.......technically the chamber has no freebore. It has a long 3 degree lead or throat. I'd have a reamer specd with 0.258-0.2585 freebore diameter, 1.5 degree lead. Keep the freebore length around 0.130-0.140 and you should be good.

 

[Keechi Kid]

SAAMI, no.......technically the chamber has no freebore. It has a long 3 degree lead or throat. I'd have a reamer specd with 0.258-0.2585 freebore diameter, 1.5 degree lead. Keep the freebore length around 0.130-0.140 and you should be good.

Ok. Thank you.