.243 reality check? -->Chose 6.5creed

Rich M

WKR
Joined
Jun 14, 2017
Messages
5,551
Location
Orlando
A 243 needs a break as much as a 22 long rifle does.

Shot a 300#, 160 class muley 2019 with 243. Took a high shoulder shot due to property boundaries and he stayed up but was stunned, 2nd shot behind shoulder dropped him. Was using blue box federals in 100 gr.

He won't have any trouble shooting a muley w 243. Put one in the boiler room inside 400 yds and that'll be that.
 

Buckweet

FNG
Joined
Aug 15, 2020
Messages
7
I have never killed a mule deer but have killed a truck load of whitetails with a 243 100 grn Winchester’s and federals
 

Giddy

FNG
Joined
Sep 24, 2018
Messages
15
I have shot a lot of blacktails with a .243 and 100 grain Federals but no mule deer. Now I have to shot lead free and have not had good luck with the 90 grain copper blue box federal. Shot placement is key.
 
Joined
May 8, 2020
Messages
78
I shot my first muley with a .243. Not a thing wrong with it. As mentioned its all about shot placement. Make sure he has time behind the rifle and its sighted in for him. You should be just fine.
 

wyosam

WKR
Joined
Aug 5, 2019
Messages
1,246
.243 is a fantastic muley cartridge. I’m partial to copper monos- I’ve taken lots of Muleys with the Barnes 85 Gr TSX. There’s not a muley on the planet I wouldn’t take with that round at 400.


Sent from my iPad using Tapatalk
 

KineKilla

WKR
Joined
Apr 8, 2020
Messages
508
Location
Utah
.243 all day for mule deer. I don't own a single .30 caliber rifle and manage to hunt and kill anything that gives me a shot or that I can get a tag for.



Sent from my SM-N976U using Tapatalk
 
Joined
Sep 23, 2015
Messages
29
Location
Central Wa.
Congrats to you and your fam! Quite the handsome buck, deep forked, and very balanced. Quality time with family is priceless!

I was late to chime in on the .243 opinion, but mine is a positive as well. I killed my best buck to date last week with my dad's 40-year-old Sako. It was his favorite rifle, and I was using his 20-year-old hand loads. That gun loves 90gr Speer PSP's. 1 to the boiler and the big buck made a short dash to the happy hunting ground. My son killed his first buck at 9yo using a youth model .243. It was a 3.5yo 4x4 mulie, not huge but a great 1st deer. Anyhow, he wacked it in the tank at 150yds and it reared up like 'Ol Silver on the Lone Ranger, made one complete pirouette, and crashed and burned quite the site. The .243 is Bad Medicine!!
 

Rich M

WKR
Joined
Jun 14, 2017
Messages
5,551
Location
Orlando
Very nice buck!

I noticed the 6.5 and 120 gr. Great choice. How's he like that combo for shooting?
 
Joined
Feb 24, 2016
Messages
2,575
With so many better choices, I, for the life of me, have no idea why anyone would shoot a .243 for big game. But, to each their own.

I have personally seen deer run hundreds of yards after having perfect shots preformed on them. With little to no blood trails. Did they die? Yes, but they were difficult to find.
 
OP
sndmn11

sndmn11

"DADDY"
Joined
Mar 28, 2017
Messages
10,269
Location
Morrison, Colorado
Very nice buck!

I noticed the 6.5 and 120 gr. Great choice. How's he like that combo for shooting?

The rifle is a Weatherby Vanguard, that started out as their compact model with the stock spacer to adjust length of pull from adult to youth, and a 20" barrel.
The factory stock was terrible with the barrel riding the channel on one side the full length, and it was difficult to get a 2" 100yd group. I called B&C because my Wilderness has a lighter version of their stock that is not the same as what is widely available. They told me they had two of those stocks in short action left, so I ordered one. When it showed up I glass bedded the tang and the lug.
I also had Black Canyon Customs in Denver put a Hawkins brake on it. Last, I installed a Spartan universal adapter in the foreend for their javelin bipod.
The gun shoots as well as any of us can with the federal Trophy copper, and hornady whitetail. My magnetospeed has the federal load at 2764fps over 21 measured shots.
This deer was quartering away with his left side towards us and upslope. The bullet centered the second to last rib, breaking the two on either side as well, and a racquetball sized hole was the result. We were tricked on the other side because there was no apparent exit. When we were done cutting meat, I sawed the entry side ribs off and dug into things. The lungs were jello, I kept the heart, and after pulling everything out, I found the exit hole high above and a little behind the shoulder, it broke one rib but was much smaller at maybe a larger bottle cap. That should was fine, so I think maybe that right front was stretched forward on the shot, and then the scapula in a normal position covered the exit hole up because there wasn't any indication it was there until I got inside.
The deer was bounding, paused, was shot, and then slow trotted about 30 yards, the blood trail was massive, and I can't think that we would look to a different factory mono load unless availability were an issue.
 
Joined
Dec 30, 2014
Messages
9,572
With so many better choices, I, for the life of me, have no idea why anyone would shoot a .243 for big game. But, to each their own.

I have personally seen deer run hundreds of yards after having perfect shots preformed on them. With little to no blood trails. Did they die? Yes, but they were difficult to find.

Must not have been using Premium Killing Bullets.. 😁
 
OP
sndmn11

sndmn11

"DADDY"
Joined
Mar 28, 2017
Messages
10,269
Location
Morrison, Colorado
Finally got this engraved, tried a few different things to fill and am hoping this laquer stick stuff stays.
I should draw the same mule deer tag and am hoping to have a repeat. I, of course, will be using this rifle and think I might throw a red web BC stock on it cause the kid likes it.

PXL_20220411_212045568.jpgPXL_20220411_212052878.jpg
 

mtnlomo

FNG
Joined
Jan 21, 2021
Messages
91
Location
PNW
I watched my 80 lbs younger sister knock one off its feet at 150 yards with a 95 grain partition last October. I wouldn’t hesitate using it.


Sent from my iPhone using Tapatalk
 
Joined
Apr 5, 2021
Messages
483
Location
Washington
Finally got this engraved, tried a few different things to fill and am hoping this laquer stick stuff stays.
I should draw the same mule deer tag and am hoping to have a repeat. I, of course, will be using this rifle and think I might throw a red web BC stock on it cause the kid likes it.

View attachment 400351View attachment 400352
Must have got something stuck in my eye.
 
Top