.223 for bear, mountain goat, deer, elk, and moose.

[Deere_Man]

A quick search didn't turn this up - anyone using the Sierra 62 grain Gameking?

22 CAL 62 GR SBT GameKing (SGK)

The Bulletsmiths®. Reloadable bullets for rifles and pistols designed for precision target shooting, hunting, and defense. Crafting a tradition of precision since 1947.

sierrabullets.com

Specifically, will it stabilize in a 12 twist? If not, is there a bullet in the 60-65 grain class that will stabilize? This would be for a 26" 1-12 twist Tikka 595 .223 strictly for use at 0-250 yards on southern whitetails (or smaller).

(ETA: Specifically looking for conventional cup/core soft points or bonded lead/copper. Not mono.

The Sierra 63gr SMP.

22 CAL 63 GR SMP Varminter

The Bulletsmiths®. Reloadable bullets for rifles and pistols designed for precision target shooting, hunting, and defense. Crafting a tradition of precision since 1947.

sierrabullets.com

 

[Chris in TN]

The Sierra 63gr SMP.

22 CAL 63 GR SMP Varminter

The Bulletsmiths®. Reloadable bullets for rifles and pistols designed for precision target shooting, hunting, and defense. Crafting a tradition of precision since 1947.

sierrabullets.com

Thank you. I've always sort of overlooked it because of its low BC but for my use case I don't think it would matter much.

 

[TeaGull]

^^on that note what's the word on the DRT ammo/projectiles?

Shot a buck deer and cow elk with the 135g 6.5 this year, worked fantastic.
Ordered 500 of the 79g and a 22cm barrel to shoot next year. @SouthPaw has reported good success with the 79g at creedmoor speeds.

 

[Deere_Man]

Thank you. I've always sort of overlooked it because of its low BC but for my use case I don't think it would matter much.

You are welcome. I have an Ruger M77 Ultra Light in 223 with a 1:12 twist and in my research this bullet keeps getting mentioned as absolute deer poison.

 

[woods89]

Sierra does make the TMK in 60gr. Talk to @KyleR1985 , he can hook you up at a great price.

I'd be curious what penetration looks like with this bullet. Having shot a few deer with 69 gr TMK, it does not appear to penetrate like the 77 gr version. 69 gr are still sufficient for whitetails, but I have to believe this trend continues, and I wonder where the point is that it causes problems.
Not saying someone shouldn't use it, but it does make me curious.

 

[RockAndSage]

I'd be curious what penetration looks like with this bullet. Having shot a few deer with 69 gr TMK, it does not appear to penetrate like the 77 gr version. 69 gr are still sufficient for whitetails, but I have to believe this trend continues, and I wonder where the point is that it causes problems.
Not saying someone shouldn't use it, but it does make me curious.

You're right. It definitely wouldn't penetrate as deep as the heavier bullets, and there would be a point of diminishing returns. But 50 and 55gr soft points out of slow-twist .22-250 and .220 Swift barrels have been killing deer for almost a century. If his barrel is too slow for 77 or 69gr, the 60 might be an option.

 

[Bubbadoyle]

Sierra does make the TMK in 60gr. Talk to @KyleR1985 , he can hook you up at a great price.

I picked some of these up to try in my 22 K hornet. I haven't had a chance to try them yet though.

Sent from my SM-S938U using Tapatalk

 

[Drenalin]

What is sad is you interrupting a "data" thread with your useless opinion. Without good data we would have never known that energy means nothing. Without good data we wouldn't know the velocity threshold for the bullets we are using. How many deer have you taken at what yardage at what impact velocity with what bullet? Pics will help. And as far as our "experts" go, we have groups of guys in the thousands of big game kills.

Ball is in your court. Put up or shut up Bugger...

bug·ger

/ˈbəɡər/
noun
noun: bugger; plural noun: buggers

1. 1.

vulgar slang•
derogatory
used as a term of abuse, typically for a man.

You are pissing in the wind friend. Focus on things that are relevant to the thread, you’ll be much happier.

 

[SkunkCabbage]

Made a few of these up for a buddy for his fall meat collection. He was having some issues with the other unknown bullets he was running so I volunteered to make him a load and to report back with his findings and kills.

Said there’s a noticeable difference in killing power as these things pack a noticeable little punch. Second photo shows lung fragments on the ground. He’s impressed

77tmk from a 223 sub 100yrd
Sitka blacktail.

 

[SkunkCabbage]

Reporting for another buddy who’s not on the forum. Shot a mulie this am.

22arc - 88gr eldm
2816fps muzzle - 2390fps @ 272yrd

Deer was immobilized and required a follow up shot to finish it where it dropped.

 

[TX_Mike D.]

Alright, got everything in and am hoping to get it all put together this weekend. I'm solo parenting so there is a chance the kids keep me too busy, but we'll see.

I have a question that I think has been beat to death here, but before I start shooting through ammo supplies I want to be sure. I've got a pile of various 5.56mm FMJ's sitting around that were bought to be plinking rounds for the AR. It's all factory made new or remans. Is the consensus that all factory made 5.56mm ammunition is safe to shoot in the Tikka's, or should I reserve the 5.56mm that isn't Bone Frog, Black Hills, AAC, or the other brand names mentioned in this thread to the AR for general plinking at the range?

I don't expect the different bullet weight to have the same POI, so it's not like I plan is zeroing the rifle with it, but there's enough that it would take me a bit to burn through. It's probably just a Wednesday's amount of ammo for some of the guys on this thread though... I just don't want to damage the rifle, or myself, plinking with junk ammo that I would only be shooting for $@*%s and giggles.

 

[SBR Sarge]

Reading through the thread most are using heavy for caliber bullets which I’d definitely prefer.
As I live in CA where copper/monolithic is a requirement what would be the recommended manufactured ammo/bullet (I do not hand load) for the .223 Rem for deer sized game (seems Hornady and Barnes make them in the 50gr-55gr range)?

If your rifle can handle a 5.56 load, Blackarc loads NAS3 cases with the Barnes 70 gr TSX. That might help with the velocity that the solid coppers need.

NAS3 70GR TSX 20CT - Blackarc Munitions

NOTE: This is a high-performance round, some rifles may require mass regulating or tuning of the gas system MORE INFORMATION CONDITION NEW MANUFACTURER BLACKARC MUNITIONS CASE TYPE NAS3 (NICKEL ALLOY STAINLESS) BARREL TEST 18 inch DOUGLAS BULLET MAKE BARNES TSX BULLET WEIGHT 70gr CALIBER...

blackarcmunitions.com

 

[twingo]

I was convinced to read this thread and before getting a quarter of the way through, I ordered a tikka t3x 16” threaded and borrowed the SWFA 10x.
A mag full of TMKs and only 40 mins of walking lead to another point for the RSS.
130 yards, quartering away, hit just before the half point (terrible breathing from the hike up) and a 40 yard death run across the side of the mountain.

Second photo is exit wound. He sounded like a water bed when rolling him around to quarter out.

 

[old bugger]

What is sad is you interrupting a "data" thread with your useless opinion. Without good data we would have never known that energy means nothing. Without good data we wouldn't know the velocity threshold for the bullets we are using. How many deer have you taken at what yardage at what impact velocity with what bullet? Pics will help. And as far as our "experts" go, we have groups of guys in the thousands of big game kills.

Ball is in your court. Put up or shut up Bugger...

bug·ger

/ˈbəɡər/
noun
noun: bugger; plural noun: buggers

1. 1.

vulgar slang•
derogatory
used as a term of abuse, typically for a man.

Thats Bugger as in old Bugger. In the 70's they called me Squatch. Yer feels are hurt, I understand.
After seeing what you & others are putting down in print, just stop. Talk about useless, it's hard to believe you think people are buying what you beginners are selling. LMAO. Night Jr.

 

[The Guide]

Thats Bugger as in old Bugger. In the 70's they called me Squatch. Yer feels are hurt, I understand.
After seeing what you & others are putting down in print, just stop. Talk about useless, it's hard to believe you think people are buying what you beginners are selling. LMAO. Night Jr.

Old Boogers get flicked. Go be crusty somewhere else...

Jay

 

[Matt5266]

I picture old bugger lookin like TaperPins profile picture

 

[sierracharlie338]

Thats Bugger as in old Bugger. In the 70's they called me Squatch. Yer feels are hurt, I understand.
After seeing what you & others are putting down in print, just stop. Talk about useless, it's hard to believe you think people are buying what you beginners are selling. LMAO. Night Jr.

Ooo I speak booger, allow me to translate:

“Blah blah blah, GeT oFf My LaWn!!!”
*shakes fist at clouds*
“My pappy’s, grand pappy told me it’s all about how much wallop ya got and he knew everything, he even told me so!”

 

[KHntr]

Reporting for another buddy who’s not on the forum. Shot a mulie this am.

22arc - 88gr eldm
2816fps muzzle - 2390fps @ 272yrd

I’m actually rather surprised he isn’t on this forum…

Too bad, he’s wasting a lot of good info on nutz trying to drag people into this century.

 

[Schmo]

Alright, got everything in and am hoping to get it all put together this weekend. I'm solo parenting so there is a chance the kids keep me too busy, but we'll see.

I have a question that I think has been beat to death here, but before I start shooting through ammo supplies I want to be sure. I've got a pile of various 5.56mm FMJ's sitting around that were bought to be plinking rounds for the AR. It's all factory made new or remans. Is the consensus that all factory made 5.56mm ammunition is safe to shoot in the Tikka's, or should I reserve the 5.56mm that isn't Bone Frog, Black Hills, AAC, or the other brand names mentioned in this thread to the AR for general plinking at the range?

I don't expect the different bullet weight to have the same POI, so it's not like I plan is zeroing the rifle with it, but there's enough that it would take me a bit to burn through. It's probably just a Wednesday's amount of ammo for some of the guys on this thread though... I just don't want to damage the rifle, or myself, plinking with junk ammo that I would only be shooting for $@*%s and giggles.

You’ll be fine!

 

[old bugger]

Old Boogers get flicked. Go be crusty somewhere else...

Jay

No need to butter me up son! I'll go play with one of my AR's before I fill my diaper this time.