.223 for bear, mountain goat, deer, elk, and moose.

[Chet707]

I am shooting a gen 1 ruuger american predator. Can't help with the 5.56 question but I have been using a resilient suppressors simple man 30 cal can on mine and its been great! I use the same can on a gen 1 predator model in 6.5 creedmoor and on the 243.

 

[Chet707]

Also, my mom just filled her AZ cow elk tag. Ruger american gen 2 chambered in 22 arc with a huxworks flow 5.56 k. 88eldm at 125 yards. Heart shot and the cow made it about 10 yards and piled up. No autopsy pics since they are still in the field and im not there to take any.

 

[Hardly_Hangin]

60 ish yards DRT on a whitetail doe. Pass thru with 77tmk aac out of a lightish weight gasser AR i built last year. My 2nd data point with 223.

First pic is the doe for supper - smoked her backstraps and both shoulders whole, then pressure cooked the shoulders and pulled/shredded meat. The wife fixed cream corn, mashd taters and home grown green beans.

 

[zdc1775]

I'm strongly considering buying a Gen 2 Ruger American in either 5.56 (Ranch model) or .223 (standard) with the possibility of adding a can sometime down the road. I already have a gen 1 in 7.62x39 but another rifle for affordable trigger time and deer hunting would be good with more of my four kids wanting to get out. I'm leaning towards the standard 20" model as it would pick up a bit of velocity, be slightly quieter, and well, I like the looks more.

Knowing that the Tikkas are well loved here, I'll just say that I owned one a decade ago. Extremely accurate and great trigger, but the ergos just never did it for me. That rifle was responsible for lots of deer.

A couple questions:
Does anyone have experience shooting 5.56 through Rugers chambered in .223? Any overpressure signs? If they aren't good for 5.56 Ill just opt for the Ranch.

Second, what are some recommendations for relatively budget friendly cans? That would be a whole new world for me but the elimination of the few makes it much more appealing.

I have one of the 20" Gen 2s in 223. So far I have put about 6-700 rounds of factory 5.56 through it and the only issue I've run into was a few flattened primers from one lot of AAC ammo. I can't remember if it was the 75 BTHP or 77 SMK and I only had that issue once this past summer when I was out shooting with a friend when it was right at 100 degrees outside and we were using the bed of his truck as the storage area so the guns and ammo were sitting sun until we were shooting them. I also had the same issue shooting that ammo in a 5.56 AR so can't really blame it on the rifle.

 

[BigWoods]

I have one of the 20" Gen 2s in 223. So far I have put about 6-700 rounds of factory 5.56 through it and the only issue I've run into was a few flattened primers from one lot of AAC ammo. I can't remember if it was the 75 BTHP or 77 SMK and I only had that issue once this past summer when I was out shooting with a friend when it was right at 100 degrees outside and we were using the bed of his truck as the storage area so the guns and ammo were sitting sun until we were shooting them. I also had the same issue shooting that ammo in a 5.56 AR so can't really blame it on the rifle.

That's a great data point! Sounds like I should be good to go then. Especially since I can't imagine going out shooting in 100° weather here in Northern New England. How's the accuracy been for you?

 

[jonandy]

60 ish yards DRT on a whitetail doe. Pass thru with 77tmk aac out of a lightish weight gasser AR i built last year. My 2nd data point with 223.

First pic is the doe for supper - smoked her backstraps and both shoulders whole, then pressure cooked the shoulders and pulled/shredded meat. The wife fixed cream corn, mashd taters and home grown green beans.

That looks tasty!! Nice work.

 

[zdc1775]

That's a great data point! Sounds like I should be good to go then. Especially since I can't imagine going out shooting in 100° weather here in Northern New England. How's the accuracy been for you?

Accuracy has been great, this is actually the first bolt gun I've ever had that can shoot the 77 TMK'S into a less than 3" group. It shoots the BH 77 TMK and SMK's into a 1-1.5" ten shot group at 100, with the AAC 75 BTHP and 77 SMK and TMK it varies from 1-2" depending on which bullet and the specific lot, and all the bullets I've tries in handloads I've been about to find a load that would shoot around 1" pretty easily. But I've really only shot it for accuracy with bullets that were 62 gr +, and other than the 62 TTSX and some 68 gr Hornady, they have been 70+ so I can't speak to accuracy with lighter bullets.

Obviously when I've run stuff like bulk 55 or 62 gr FMJ's through it, it shoots much larger groups, but even with those it's worked fine for hitting steel out to 300.

 

[Packmansion]

Despite the Tupperware budget feel of rugers. They are accurate as heck and are pretty good value. A ruger will not stop you from performing the same as a much more expensive build but it will feel cheap. I had a Gen 1 and I sold it for a few reasons. What I disliked most was the bolt and generally the machining was rough. The barrel was not smooth and the bolt made a zipper sound and it would drag across the top of the ar mag, felt very cheap. However it was a sub moa gun for sure.