.223 for bear, mountain goat, deer, elk, and moose.

Joined
Oct 14, 2023
Messages
1,454
Location
Houston (adjacent) TX
Went and got my daughters RSS zeroed today. Besides the brutal heat at 9am and 90% humidity, that little gun is just plain fun!

Ran out of time to test some handloads but the factory stuff I was shooting was easily MOA without a solid rest. I might have to pick up a second one so I don’t have to pretend I’m shooting my daughters for her….
 

atmat

WKR
Joined
Jun 10, 2022
Messages
3,192
Location
Colorado
Is anyone out there aware of pending minimum caliber legislation in any states? I would like to do a 223, but if more legal doors are closing, then it is tough.
Honestly, get a 223 anyway.

I live in a state with 6mm restrictions. I still own a 223. They’re so cheap to practice with compared to most rounds, that it’s actually cheaper to buy one as a second rifle if you’re getting volume shooting in.
 

xsn10s

WKR
Joined
May 3, 2022
Messages
462
Honestly, get a 223 anyway.

I live in a state with 6mm restrictions. I still own a 223. They’re so cheap to practice with compared to most rounds, that it’s actually cheaper to buy one as a second rifle if you’re getting volume shooting in.
I'll have four soon. Well three 5.56 AR's and a .223 bolt rifle here in a week or so. So far I dropped two badgers and one yote with the 75gr ELDM. It hits pretty hard.
 

Thegman

WKR
Joined
Nov 21, 2015
Messages
709
I'll have four soon. Well three 5.56 AR's and a .223 bolt rifle here in a week or so. So far I dropped two badgers and one yote with the 75gr ELDM. It hits pretty hard.
What barrel twist and loads are you using for your 75ELDM AR loads, and what kind of accuracy are you getting?

I've not been able to get them to shoot well enough in mine. 77TMK was fairly easy to load for.
 

xsn10s

WKR
Joined
May 3, 2022
Messages
462
What barrel twist and loads are you using for your 75ELDM AR loads, and what kind of accuracy are you getting?

I've not been able to get them to shoot well enough in mine. 77TMK was fairly easy to load for.
I have an old Colt 1-7" 20" barrel on my build. I modified a stainless 20 round mag so I can seat out to 2.365" if I remember correctly. About 3/4 moa with Winchester whitebox primers and TAC.
 

xsn10s

WKR
Joined
May 3, 2022
Messages
462
What barrel twist and loads are you using for your 75ELDM AR loads, and what kind of accuracy are you getting?

I've not been able to get them to shoot well enough in mine. 77TMK was fairly easy to load for.
Honestly though if you're getting good accuracy with the 77TMK I'd just shoot that. If my new bolt rifle shoots the 75gr or 80gr ELDM's I'll allocate most those bullets for it. The 73gr ELDM's I have can be loaded to standard mag length and shoot well from my AR's.
 

Grundy53

WKR
Joined
Nov 24, 2013
Messages
1,039
Location
Washington State
Honestly, get a 223 anyway.

I live in a state with 6mm restrictions. I still own a 223. They’re so cheap to practice with compared to most rounds, that it’s actually cheaper to buy one as a second rifle if you’re getting volume shooting in.
Great advice. I'm in the same boat. I get more/better practice with my .223 than all my hunting rifles combined. Plus you can still take it to free states.

Sent from my SM-S901U using Tapatalk
 

3one5

FNG
Joined
Aug 3, 2024
Messages
13
Honestly though if you're getting good accuracy with the 77TMK I'd just shoot that. If my new bolt rifle shoots the 75gr or 80gr ELDM's I'll allocate most those bullets for it. The 73gr ELDM's I have can be loaded to standard mag length and shoot well from my AR's.
I've been toying with picking up some 73gr ELD-M's as the TMK's are nearly impossible to find. Does anyone have any experience hunting with the 73gr ELD-M's?
 

3one5

FNG
Joined
Aug 3, 2024
Messages
13
Honestly, get a 223 anyway.

I live in a state with 6mm restrictions. I still own a 223. They’re so cheap to practice with compared to most rounds, that it’s actually cheaper to buy one as a second rifle if you’re getting volume shooting in.
That's what I did, I built a 5.56 that is almost an exact copy of my 6.5 Grenel to save money on practice. Recoil is almost exactly the same.
 

Attachments

  • IMG_2831.jpeg
    IMG_2831.jpeg
    340.4 KB · Views: 54

Billogna

Lil-Rokslider
Joined
Nov 3, 2020
Messages
238
Location
Central MO
I've been toying with picking up some 73gr ELD-M's as the TMK's are nearly impossible to find. Does anyone have any experience hunting with the 73gr ELD-M's?
No personal experience with the 73's but the general consensus is that it is the 2nd best option in an AR platform 223 for hunting. Slightly less penetration than the TMK.
 

3one5

FNG
Joined
Aug 3, 2024
Messages
13
No personal experience with the 73's but the general consensus is that it is the 2nd best option in an AR platform 223 for hunting. Slightly less penetration than the TMK.
Awesome, thank you. I'll get an order placed and see how they do in my rifle.
 

xsn10s

WKR
Joined
May 3, 2022
Messages
462
I've been toying with picking up some 73gr ELD-M's as the TMK's are nearly impossible to find. Does anyone have any experience hunting with the 73gr ELD-M's?
I'm pretty sure there's a thread on here about the 73gr and 75gr ELDM's on RS.
 

PistolPete

Lil-Rokslider
Joined
Dec 6, 2019
Messages
284
No. It’s going the other way. And, there are only a few states with above .224 restrictions.

Just know that there are state wildlife agency employees actively cataloging info from this thread and elsewhere in order to persuade ruling committees to drop the minimum caliber laws and allow 22s for deer. By my count, 38 states already allow it.

I'm one of them who is working on that - so thanks!
 

Thegman

WKR
Joined
Nov 21, 2015
Messages
709
Honestly though if you're getting good accuracy with the 77TMK I'd just shoot that. If my new bolt rifle shoots the 75gr or 80gr ELDM's I'll allocate most those bullets for it. The 73gr ELDM's I have can be loaded to standard mag length and shoot well from my AR's.
I wouldn't argue with that, but the TMKs are so hard to find it would be nice to have an option that's available for an alternate load.
 

WIDrake

FNG
Joined
Jul 30, 2024
Messages
26
I've been toying with picking up some 73gr ELD-M's as the TMK's are nearly impossible to find. Does anyone have any experience hunting with the 73gr ELD-M's?
I think it was about 100 pages back a guy in alaska(?) took a moose with them. That was all I needed to decide it's my new go to with my bolt gun. The 77s will be for my gassers
 

3one5

FNG
Joined
Aug 3, 2024
Messages
13
I'm pretty sure there's a thread on here about the 73gr and 75gr ELDM's on RS.
I’ll check those out.

I did a bit of research and found a couple folks saying they were unable to get the 73gr ELD-Ms to shoot well in their White Oak Armory barrels. That’s what I happen to have so I changed my order over to 69gr Sierra TMKs.
 

Drenalin

MKR
Joined
Nov 15, 2018
Messages
3,016
I've been toying with picking up some 73gr ELD-M's as the TMK's are nearly impossible to find. Does anyone have any experience hunting with the 73gr ELD-M's?
I’ve shot or seen shot 20 whitetails with the 73 ELD-M. It does very nicely.
 

Dave0317

WKR
Joined
Mar 22, 2017
Messages
431
Location
North MS
I’ve shot or seen shot 20 whitetails with the 73 ELD-M. It does very nicely.
Can you expand a bit? I plan to use them and just kinda curious what to expect if I let my kid shoot his first deer with one? I’m confident in what they do terminally between reading here and seeing the gel block tests.

More just curious if I need to be ready to not expect an exit wound at all, or is it going to be like a softball size exit hole with guts everywhere? Or something in between?
 
Top