223 ai load data

[KyleR1985]

Do you find you need to full-length size after the third firing? Just wondering how long one can get by with neck sizing only with less stretch in the AI case. 2 or 3 firings was about all I could neck size with 223 being chambered in an UL-UL. Gave up on neck sizing in general in that case.

I’ll neck size a few 3x cases and see if they chamber.

I was only neck sizing to make headspace on first firing, and then second firing because I knew some of the brass hadn’t fully blown out the shoulders completely by case capacity measurement.

Probably could get away with it for more firings I just hadn’t planned to

 

[TradLife406]

Do you jam the bullets for forming 223ai?

I didn't today. When I started making my ammo I didn't have the barrel yet.

Just got cheap bulk 55 fmj's and had a couple lb of blc2. Loaded em near max and to fit the magazine.

Seemed to work good. Cranked off about 70 of them. Shoulders definitely popped out.

 

[KyleR1985]

I didn't today. When I started making my ammo I didn't have the barrel yet.

Just got cheap bulk 55 fmj's and had a couple lb of blc2. Loaded em near max and to fit the magazine.

Seemed to work good. Cranked off about 70 of them. Shoulders definitely popped out.

What brass? Any misfires?