22 creedmore

[Rcyfish]

Anyone have any info on a 22 creedmore
I’m thinking about putting a 22 creedmore barrel on my Ruger precision gen1 that’s in 6mm creedmore now

 

[hereinaz]

I am getting ready to do the same with another rifle. Here’s a thread to read through.

“The 22 Creedmoor Project”

What I’m calling the 22 creedmoor project, has started. The gun was built by @barehandlineman at High Voltage Armory. 1-8 twist 24” Heavy Palma Muller Works Defiance SA HVA Exodus Action MDT XRS Chassis Bix N Andy tac sport pro trigger Area 419 Hunt Rings. .94” Trijicon Tenmile HX 5-25X50 MOA...

rokslide.com

 

[ID_Matt]

Anyone have any info on a 22 creedmore
I’m thinking about putting a 22 creedmore barrel on my Ruger precision gen1 that’s in 6mm creedmore now

There are a few threads on here about it. Here is one that has a bunch of info. Your search will yield more results if you spell it "creedmoor"

The 22 creedmoor thread

Not sure if this will work, but 75 gr ELDM out of my 16.5” at 220 yards this afternoon did quite well. High shoulder.

rokslide.com

 

[mxgsfmdpx]

I’d highly recommend starting with a Tikka in .22-250 with the 8 twist barrel. Have it re-chambered to 22 Creedmoor keeping the factory barrel and then chop to 18-20” and thread for a suppressor.

Throw it in a Rokstok and go buy a bunch of factory Hornady Precision Hunter 80 ELDX ammo and get to shooting! If you reload the 77 TMKs shoot phenomenally and kill well. If you’re a long range high BC guy the 88 ELDM is a little beast, I’ve shot mine to 1,200 yards with consistent hits on 12” plates.


That’s exactly what this gun is, and I have another one just like it. It has 1,200 rounds down the barrel and killed 13 big game animals in 2024. No signs of slowing down yet.

Highly recommend this route! It’s a point and click and watch hits, little killing machine.

 

[waspocrew]

Search function with 22 Creedmoor - plenty of info already covered.

 

[hereinaz]

I’d highly recommend starting with a Tikka in .22-250 with the 8 twist barrel. Have it re-chambered to 22 Creedmoor keeping the factory barrel and then chop to 18-20” and thread for a suppressor.

Throw it in a Rokstok and go buy a bunch of factory Hornady Precision Hunter 80 ELDX ammo and get to shooting! If you reload the 77 TMKs shoot phenomenally and kill well. If you’re a long range high BC guy the 88 ELDM is a little beast, I’ve shot mine to 1,200 yards with consistent hits on 12” plates.


That’s exactly what this gun is, and I have another one just like it. It has 1,200 rounds down the barrel and killed 13 big game animals in 2024. No signs of slowing down yet.

Highly recommend this route! It’s a point and click and watch hits, little killing machine.

View attachment 811049

View attachment 811047

View attachment 811051

View attachment 811053

View attachment 811052

View attachment 811048

View attachment 811044

This is the stuff that has made me want to build one.

Great velocity from short barrels running high BC bullets. My little 22BR will get most of my 22 cal fun shooting, But, the 22 creed will go hunting for sure.

I will try the 80s and 88s ELDm I have on the shelf.

I wanted to build a light folding stock rifle, but HNT26 are spendy for the stock alone. So, I bought a used Sig Cross. Now to decide between barrels. I found a 22” prefit on the shelf or buy a customized from Preferred Barrel. That is the question.

 

[Tom-D]

I’d highly recommend starting with a Tikka in .22-250 with the 8 twist barrel. Have it re-chambered to 22 Creedmoor keeping the factory barrel and then chop to 18-20” and thread for a suppressor.

Throw it in a Rokstok and go buy a bunch of factory Hornady Precision Hunter 80 ELDX ammo and get to shooting! If you reload the 77 TMKs shoot phenomenally and kill well. If you’re a long range high BC guy the 88 ELDM is a little beast, I’ve shot mine to 1,200 yards with consistent hits on 12” plates.


That’s exactly what this gun is, and I have another one just like it. It has 1,200 rounds down the barrel and killed 13 big game animals in 2024. No signs of slowing down yet.

Highly recommend this route! It’s a point and click and watch hits, little killing machine.

View attachment 811049

View attachment 811047

View attachment 811051

View attachment 811053

View attachment 811052

View attachment 811048

View attachment 811044

Awesome looking rifle. Is that a varmint barrel?

 

[mxgsfmdpx]

Awesome looking rifle. Is that a varmint barrel?

Factory Tikka lite stainless.

 

[SloppyJ]

The tikka is the entire package easy button but if you have a rifle you can throw a new barrel on, that can be pretty economical as well. However, it does start to become a PITA if you want to change barrels all the time and re-zero.

When i shoot out my 6cm it will get a new lease on life as a 22creed. Thinking 18" spiral fluted and it will have a dedicated Dilligent Defense wolfhunter on it.

 

[Juan_ID]

This is the stuff that has made me want to build one.

Great velocity from short barrels running high BC bullets. My little 22BR will get most of my 22 cal fun shooting, But, the 22 creed will go hunting for sure.

I will try the 80s and 88s ELDm I have on the shelf.

I wanted to build a light folding stock rifle, but HNT26 are spendy for the stock alone. So, I bought a used Sig Cross. Now to decide between barrels. I found a 22” prefit on the shelf or buy a customized from Preferred Barrel. That is the question.

On the shelf prefit gets you shooting sooner, I have nothing but good to say about the preferred prefits I’ve had for what that’s worth. If cost is similar I’d probably just get the one on the shelf.

 

[Tanner]

I’d highly recommend starting with a Tikka in .22-250 with the 8 twist barrel. Have it re-chambered to 22 Creedmoor keeping the factory barrel and then chop to 18-20” and thread for a suppressor.

Throw it in a Rokstok and go buy a bunch of factory Hornady Precision Hunter 80 ELDX ammo and get to shooting! If you reload the 77 TMKs shoot phenomenally and kill well. If you’re a long range high BC guy the 88 ELDM is a little beast, I’ve shot mine to 1,200 yards with consistent hits on 12” plates.


That’s exactly what this gun is, and I have another one just like it. It has 1,200 rounds down the barrel and killed 13 big game animals in 2024. No signs of slowing down yet.

Highly recommend this route! It’s a point and click and watch hits, little killing machine.

View attachment 811049

View attachment 811047

View attachment 811051

View attachment 811053

View attachment 811052

View attachment 811048

View attachment 811044

How’s that factory Tikka barrel like the 88s? Shot any handloads ?

 

[mxgsfmdpx]

How’s that factory Tikka barrel like the 88s? Shot any handloads ?

I’ve put 100 hand loaded 88s through it and it loves them. Most accurate bullet along with the 77 TMKs, probably slightly more accurate even than the 77s.

 

[Tanner]

I’ve put 100 hand loaded 88s through it and it loves them. Most accurate bullet along with the 77 TMKs, probably slightly more accurate even than the 77s.

Right on. I’ve got a vanilla 22-250 1-8” ready to get cracked open. Had it cut to 19” before I ever fired a round so I’d be happy with 3000fps.

h4350?

 

[B_Reynolds_AK]

Right on. I’ve got a vanilla 22-250 1-8” ready to get cracked open. Had it cut to 19” before I ever fired a round so I’d be happy with 3000fps.

h4350?

19”? You’re weird.

 

[Tanner]

19”? You’re weird.

That’s not news to anybody! Decision fatigue between 18-20”…. It just made sense.

 

[mxgsfmdpx]

Right on. I’ve got a vanilla 22-250 1-8” ready to get cracked open. Had it cut to 19” before I ever fired a round so I’d be happy with 3000fps.

h4350?

Yes sir. H4350 with Peterson brass. CCI200s. WELL under pressure. 2.600. Slow but accurate.

 

[mxgsfmdpx]

That’s not news to anybody! Decision fatigue between 18-20”…. It just made sense.

That’s what Karl decided on mine too. Haha.

 

[Tom-D]

Factory Tikka lite stainless.

Ahh right just looked thicker in the pictures

 

[jsweat99]

This is quickly catching my interest for whitetails.

 

[fwafwow]

I’d highly recommend starting with a Tikka in .22-250 with the 8 twist barrel. Have it re-chambered to 22 Creedmoor keeping the factory barrel and then chop to 18-20” and thread for a suppressor.

Throw it in a Rokstok and go buy a bunch of factory Hornady Precision Hunter 80 ELDX ammo and get to shooting! If you reload the 77 TMKs shoot phenomenally and kill well. If you’re a long range high BC guy the 88 ELDM is a little beast, I’ve shot mine to 1,200 yards with consistent hits on 12” plates.


That’s exactly what this gun is, and I have another one just like it. It has 1,200 rounds down the barrel and killed 13 big game animals in 2024. No signs of slowing down yet.

Highly recommend this route! It’s a point and click and watch hits, little killing machine.

View attachment 811049

View attachment 811047

View attachment 811051

View attachment 811053

View attachment 811052

View attachment 811048

View attachment 811044

I hate you. This is NOT a good solution to my problem of having too many scopes.