1911’s in general, 9mm versions specifically

[4th_point]

G26 is 9mm, not 10mm.

G29 maybe?

 

[Dobermann]

Anything that could serve as a reasonable training stand-in for 1911-esque guns would be a great thread.

I'd like to hear more about this too.

One of the large format 'gun press' 1911 books (haven't got it to hand right now) said that their favorite was the Sig 22. While there was a suggestion that the Sig was made by GSG (which I've also heard elsewhere), that author said that the Sig had better fit and finish. FWIW.

I've only seen one GSG at the range, and it's a jam-o-matic, but I think it had some bubba gunsmithing done to it, so that's likely not a fair reference point.

A new shooter at the range recently had a Colt Gold Cup in 22; I think these are made by Walther. His ran fine and the action was smooth. I regret not shooting it ... but if I see him again, I'll be trying to buy it from him - I just don't seem to 'gel' with the ergonomics of my CZ P-07 Kadet. Might pick up a CZ 85 Kadet kit and see what that's like - clearly not a 1911 pattern, but those have all dried up locally lately.

 

[Billogna]

I'd like to hear more about this too.

One of the large format 'gun press' 1911 books (haven't got it to hand right now) said that their favorite was the Sig 22. While there was a suggestion that the Sig was made by GSG (which I've also heard elsewhere), that author said that the Sig had better fit and finish. FWIW.

I've only seen one GSG at the range, and it's a jam-o-matic, but I think it had some bubba gunsmithing done to it, so that's likely not a fair reference point.

A new shooter at the range recently had a Colt Gold Cup in 22; I think these are made by Walther. His ran fine and the action was smooth. I regret not shooting it ... but if I see him again, I'll be trying to buy it from him - I just don't seem to 'gel' with the ergonomics of my CZ P-07 Kadet. Might pick up a CZ 85 Kadet kit and see what that's like - clearly not a 1911 pattern, but those have all dried up locally lately.

The Hammerli Forge H1 22-45 is the same gun as the Colt. Both made by Walther. Mine ran almost perfect for 450 rounds it's first trip out with only one FTE late in the session. It has the exact same feel as a full size 1911 with the same controls. I don't regret the purchase one bit!

 

[24valve]

G26 is 9mm, not 10mm.

G29 maybe?

I believe you're correct, I'm not an expert on all the models of glocks. My post has been edited accordingly.

 

[NSI]

Who's got Springfield EMP experience, particularly in the 4" format?

I've got my bad idea jeans on. Considering a variety of net worth reduction techniques:

1) Convince someone to A-cut one for a COA (is there even enough width?)

2) Convince someone to bury a Bowmar (is there even enough length?)

3) Send to a smith to mill front cocking serrations and install a roll trigger (probably the only rational idea here)

4) Send to a smith to somehow attach a light rail or some other provision to carry with a TLR-7

I should probably just buy a second C but I'm curious about the single stack 9mm reduced grip world.

-J

 

[cubdriver84d]

Who's got Springfield EMP experience, particularly in the 4" format?

I've got my bad idea jeans on. Considering a variety of net worth reduction techniques:

1) Convince someone to A-cut one for a COA (is there even enough width?)

2) Convince someone to bury a Bowmar (is there even enough length?)

3) Send to a smith to mill front cocking serrations and install a roll trigger (probably the only rational idea here)

4) Send to a smith to somehow attach a light rail or some other provision to carry with a TLR-7

I should probably just buy a second C but I'm curious about the single stack 9mm reduced grip world.

-J

You could try a single stack C

 

[Nine Banger]

You could try a single stack C

It's real close in size, NSI.

Jumping in: who do we like for the kind of work you describe? I have a Colt I'd like to have front serrations added, ceracoke blown off and an ambi safety installed...I've been procrastinating on doing that last one myself.