One’s a bonded bullet and one’s not. Stands to reason.Dropped a black bear with the 142 at 2100fps. Performance was reasonable but notably smaller wounds than an ELDX.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
One’s a bonded bullet and one’s not. Stands to reason.Dropped a black bear with the 142 at 2100fps. Performance was reasonable but notably smaller wounds than an ELDX.
This is why I tend to stick with 1 shot groups. Most consistent and we all know the first shot is all that counts!there's too much variability with 2 shot samples to extrapolate a meaningful "pattern" from
This is very smart. I like to shoot 1 shot at each bull with 2 hrs cooldown period in between each shot. Look only at vertical dispersion. For every 0.1" vertical distance between shots, add 0.001" seating depth. This has worked reliably for me across 432 rifles I've tried it on.I am not done testing but I’m not shooting a 10 shot group for each load either as that is nothing I’ve ever done and never had any issues with accuracy at various ranges.
This is meaningless. You would be better off looking for animals in the clouds.I follow a few people that develop loads using the 2 shot method like this and look for that back to back minimum patterns and seat every .006. Once I seen this, I tried it and have been using it on my last 4 load developments with various rifles. And it’s been pretty spot on for fine tuning.
And then shoot 12rds of the same load?This is hunting. Not a professional match. Everyone has there way. This is not what this thread is for. I am not done testing but I’m not shooting a 10 shot group for each load either as that is nothing I’ve ever done and never had any issues with accuracy at various ranges.
If you had put those all on the same bull you would've gotten closer to seeing the real group of this gun/load. But instead you fired 3 sets of 4, then chose to post your favorite 3 out of those 12 shots and hand wave away the "cold bore flier". If you believe your gun actually shoots that type of cold bore flier, it should be repeatable, and then you should throw that gun in the trash because something is horrifically wrong with it.Finally went testing again today. Fired 3 groups of 4. The attached one was the best group. The one that is on the target low, was the initial cold bore. Then the next 3 as you see. The other 2 groups shot the same height but were about 3/4” groups.