100 Yard or 200 Yard Zero for Dialers I’m Hunting Rigs

I use a 200 yard zero. If I can’t find a place to shoot 200 yards to check my zero I know where I should be at 100 yards. I just like it because I have to dial slightly less and there isn’t much bullet rise/drop in the first 200 yards. Of course if I am hunting in very thick stuff and I know I won’t have any long shots, I just use a gun that doesn’t dial and has a lower power scope.
 
Really, so you have the marks for 25 yards intervals past 200 out to 1000, but yup 100 out to 900 just won’t give you enough time, lol.

Lol exactly what I was thinking. I’m curious who takes a 1000 yard shot that happens so fast you can’t even spend the 2 seconds to dial. The really long shots I have taken have taken a minute or 10 to set up between getting a few ranges to verify , kestrel readings, rear support and bipod perfect, maybe even a dry fire thrown in. I’m curious the hit % on these 1000 yard snapshots.


Sent from my iPhone using Tapatalk
 
Zero at 100 yards

If you know your dope you can turn the turret to 200 or whatever and leave it there when in the field.


Sent from my iPhone using Tapatalk
 
100. Aside from all the great points zero at 200 makes 50 yard shots funky. Sometimes you get a close shot
 
Lol exactly what I was thinking. I’m curious who takes a 1000 yard shot that happens so fast you can’t even spend the 2 seconds to dial. The really long shots I have taken have taken a minute or 10 to set up between getting a few ranges to verify , kestrel readings, rear support and bipod perfect, maybe even a dry fire thrown in. I’m curious the hit % on these 1000 yard snapshots.


Sent from my iPhone using Tapatalk
I'd rather not know hit % on those shots 🙄

I'd be more curious to see how often that guess chart data is actually validated at distance. Man, you'd have to hold your mouth just right when temp, DA, and a 25 yard increment all come together.
 
I zero at 100, but will also dial the scope to whatever PBR for the kill radius of the quarry I’m hunting sometimes. This way if something pops up during while “spot and stalking” or hiking to a glassing area within the range of the caliber’s PBR I’m good to go. Anything that time or distance allows/demands-I dial
 
Lol exactly what I was thinking. I’m curious who takes a 1000 yard shot that happens so fast you can’t even spend the 2 seconds to dial. The really long shots I have taken have taken a minute or 10 to set up between getting a few ranges to verify , kestrel readings, rear support and bipod perfect, maybe even a dry fire thrown in. I’m curious the hit % on these 1000 yard snapshots.


Sent from my iPhone using Tapatalk

My guess and this might sound harsh but he‘s never shot past 200. Heck even at 300 if you position yourself correctly take your time and wait for a good shot.
 
The closer the shot, the less time you have to pull it off.

Except for this one damn doe I shot at +/-15’. Stared me down for 10 minutes.
 
I’ll add this.
You could try both and see what you prefer, but after that initial test phase, I would suggest that you stick with that decision and avoid bouncing back and forth.
Just my opinion.
When I finally get the chance to shoot the animal I’m chasing, I want to keep things as simple, streamlined and systematic as possible. My brain doesn’t always think clearly in those moments.



Sent from my iPhone using Tapatalk
 
If you think about it, a 100yd zero is what makes sense. I also carry my rifle "dialed" for 250 walking around, but you should zero at 100. Having the fewest influencing variables on your true zero is important, and this just gets more true with distance.
Right. Which is why you zero at 200. So you have a point and shoot hold for anything inside of 300 yards, where the vast majority of shots occur.
 
200 yards zero for me which makes a great MPBR and minimizes the times I actually need to dial. Point and shoot for the close shots when time could be of the essence. Then you can still dial for the longer shots when there’s a better chance of having more time for adjustments.
 
Actually with most standard centerfire hunting rifles like a 308, 270, 3006 in the like, 50 yards and 200 yards are going to both be pretty close to zero. Check a trajectory chart.
I dunno. I shoot a lot of up hill and down hill shots and it seems to make a difference. Just based off personal experience
 
Back
Top