10 degree quick disconnect

[surso]

Couldn't seem to find the answer to what I believe should be a simple question. What does a 10 degree quick disconnect for your stabilizer actually do vs a standard quick disconnect? Does the 10 degree angle make it easier to quickly assemble/disassemble?

 

[joshdidthis]

I believe it's for a lower cog, helps stability. You can also tweek them side to side unlike a straight mount.

Sent from my SM-G950U using Tapatalk

 

[Jimbob]

Adds stability on another axis, makes it harder to can’t your bow.


Sent from my iPhone using Tapatalk

 

[Dvidos]

I believe it's for a lower cog, helps stability. You can also tweek them side to side unlike a straight mount.

Sent from my SM-G950U using Tapatalk

+1

 

[D.Rose]

Generally with a 10 degree disconnect you will find that the bow settles somewhat faster. On bows with very high let off when you hit full draw the bow has a tendency to want to waggle left and right. The lower center of gravity will settle that waggle down a second or two faster.

 

[Novy]

You probably won't see much difference in stability with most hunting stabilizer lengths unless you are running quite a bit of weight on the front. Mostly used for target long bars. But I do use them to kick my stab out to offset quiver weight. Looks funny but it does give me just a little more level to my bow.

 

[cdavison]

Been wondering the same thing. Glad someone asked.

 

[bbentley392t]

Generally with a 10 degree disconnect you will find that the bow settles somewhat faster. On bows with very high let off when you hit full draw the bow has a tendency to want to waggle left and right. The lower center of gravity will settle that waggle down a second or two faster.

This is pretty much the quickest & simplest explanation, honestly haven't tried a 10° on a hunting setup as I usually run a ton of weight and longer bars than "normal" for hunting...but all of my indoor & 3D freestyle setups have 10° QD's for reasons stated above.

 

[robertsdp2]

I put a 10 degree disconnect with a 12in stab on my vxr and I noticed that it held better and I could get on target quicker. Very glad I tried it