Search results

  1. M

    6 PRC reloading

    I am going to be reshooting 58 and 58.5 at .025 and .030 off. If that has the same results as before a friend turned the necks on a few pieces of brass for me and I am going to see if those pieces do any better. My inconsistencies are either neck tension or the necks are too thick. Still not...
  2. M

    6 PRC reloading

    Mine is also suppressed. The reamer I used is the one Mike Manzella of Manzella precision had made to his spec. They are seated out a good distance.
  3. M

    6 PRC reloading

    58 grain N565 3100 avg with 109 Berger and 20” barrel, 58.5 grain N565 3150 avg. I would say you will see a 20-25fps drop per inch of barrel. With a 17” you could still get around 3100. I could go faster but with a 7.5 twist I would be well over 300k RPM. Right now I am about 302K. 3150FPS is...
  4. M

    6 PRC reloading

    I think .274. I am going to adjust to .271 probably after first firing. I am also checking neck thickness.
  5. M

    Sold Kifaru Belt Pouches and Nalgene Holder

    PM sent
  6. M

    6 PRC reloading

    H1000 has gotten me more speed then N565. It is not showing the same ES and accuracy as N565 in the both the 6 and 25PRC. I am going to stick with N565. I am getting more velocity than I need. Right now I am over 300k RPM ‘s with the 109 Bergers so I will keep the speed lower. I built this rifle...
  7. M

    6 PRC reloading

    I got my barrel today and put it on my action. I loaded up 57,57.5 and 58 grains of H1000 and 58,58.5 and 59 grains of N565. Chamber measured around 2.33” CBTO so I loaded the rounds at 2.31”. Barrel finished at 3lbs 8oz and an .890” muzzle.
  8. M

    The 6UM

    I am trying a 6prc first since I have the brass and dies. It will be slower by 1-150FPS, but I don’t need to buy dies or brass. I thought about a 6UM, but I did not want to buy brass and dies.
  9. M

    The 6UM

    Every piece of brass forms to the chamber. That’s why you typically don’t need to bump shoulders back right away. I have had new pieces of brass in a box that had to be sized before firing due to not fitting in the chamber and others in the box got two firings before needing shoulder bump.
  10. M

    Sold Kifaru female slotted buckles

    Thanks
  11. M

    Sold Kifaru female slotted buckles

    Does anyone have two Kifaru female slotted buckles or know of a place that has similar ones that will work? Thanks Mark
  12. M

    6 PRC reloading

    I just put a dummy together at 2.925” with a 109 Berger and compared to my 25prc with a 135 Berger. I can’t wait for the weather to cool off so I can shoot when the barrel gets here around mid September.
  13. M

    What’s going on with Badlands Precision?

    Owner died in July. Closing shop per other forums. LRH and snipershide have forums on the details.
  14. M

    6 PRC reloading

    I have 100 pieces of Lapua brass necked down, ran a mandrel thru them and chamfered. I have a 20” ACE 6 groove, 7.5 twist Remington varmint contour barrel with a 1.20 shank on order. Manzella is going to chamber it for me. I picked up some Berger 109’s to start with. I am going to run it along...
  15. M

    Sold Zeiss conquest V6 3-18x50 and Hawkins 30mm rings

    Ttt
  16. M

    KIFARU ARK FRAME review

    If I go that route I will let you know. Thanks
  17. M

    Sold Kifaru Bedlam

    Pm sent
  18. M

    Sold Zeiss conquest V6 3-18x50 and Hawkins 30mm rings

    $1300 shipped and insured.
  19. M

    KIFARU ARK FRAME review

    I have wanted to try a Kifaru pack for a few years and I have a good hunt coming up this year. I just sold my other pack. I have been watching their site for weeks. Hopefully they will get some packs and frames in stock at some point. I didn’t want to pay extra for the Ark frame, but the videos...
  20. M

    Respond to people who accept your offer.

    Drives me nuts when buyers reach out saying they want an item and then go silent for hours. If you start a conversation about buying an item get the deal finished in a timely manner.

Latest posts

Featured Video

Stats

Threads
352,961
Messages
3,722,985
Members
80,612
Latest member
Relia

Latest Articles

Top