Search results

  1. S

    TBAC Ultra 7 or Scythe Ti?

    I just had two trust approvals inside 4 weeks wait time. Individual approvals are measured in single-digit days. I would say you can hunt suppressed this fall if you wanted :)
  2. S

    N565 6.5 prc

    I would recommend 1gr increments. I use book as a reference, but generally Im above or at max book values in my barrels. YMMV
  3. S

    is it my scope or loads? 98% good, 2% fail @ 100 yards

    Oh me too. Only ones that make no mistakes are those who do nothing or stay sober while reloading
  4. S

    is it my scope or loads? 98% good, 2% fail @ 100 yards

    Just giving the people what they want
  5. S

    is it my scope or loads? 98% good, 2% fail @ 100 yards

    I created and inadvertantly tested a 6.5 creed squib and the bullet didnt leave the case Magnum primer too
  6. S

    7mm rem mag barrel length

    I cut my 7rm t3x to 20" for suppressor Love it 150's at 2950 or 168's around 2770 top end
  7. S

    Suppressor thread gap

    sounds like your can's female threads didnt get finished all the way
  8. S

    Not the regular what cartridge poll.

    I voted for all 3 because I see them all as good options with the background given. If hunting strictly solo, Id opt for either of the creedmoors. If a youll have someone to spot, no sweat taking the prc. Sorry, not much help ha! ETA: if you don't use the 7prc for elk, I wonder why I'd own...
  9. S

    Tikka T3X lite scope ring options w/44mm objective

    +1 sportsmatch Can't beat the price. They aren't that hard to find if you are looking. AirgunsofArizona gets them in stock the most reliably from what ive seen
  10. S

    If you had to start over....

    For a noncompetition guy Im happy with Single stage press Handprimer Chargemaster lite Frankford trimmer/prepper Basic hornady dies Comparators and cheap tumbler It's all I have and I want for nothing. Only shoot 500-1000 rnds a year Digital scale/trickler was the first, best upgrade. Next...
  11. S

    Need help w pressure problem

    If 40gr has pressure, your setup is beyond internet-stranger-help and requires more troubleshooting than you posted you were willing to do. No. It is not always even ballpark. Put the initial pressure tests with virgin brass out of your mind and look at your most recent set of data--you have...
  12. S

    Not sure how to feel about Tribal Hunting…

    The quality of life on some reservations is so poor I cannot imagine focusing on the hunting regulations instead Tunnel vision
  13. S

    Need help w pressure problem

    In no particular order What do you lose by just loading and chronoing 40gr h4350 and sending it for hunting season? Finding pressure with virgin brass is a waste of time--will give misleading results 0.5gr is nothing to back a charge off of. It's 1% of the load 100+ shots on a suppressor with...
  14. S

    Inconsistent/not enough shoulder bumps?

    Does your brass rechamber? If it rechambers, leave it all alone
  15. S

    Finally took the FFP plunge, but only half way.

    had a coworker bring up how FFP sucks because you cant see it at low power, so he prefers SFP scopes. He went home and looked closer at his scope only to find out it he was using FFP all along
  16. S

    Would you buy this scope?

    G2H is an awesome reticle. I like it as much or more than the maven SHR-MIL
  17. S

    Would you buy this scope?

    Absolutely for $1300 For $1500 probably not in a rush Why wasn't this just a poll?
  18. S

    Is this acceptable for high end rings? And a couple other questions

    Not once did you mention reticle plumbness relative the bore as being your worry. But if that is your worry, I'd just like to say that is a largely overblown issue 0.5° cant error with a 2" height over bore zeroed at 100 yards is a windage error of 0.017" per 100 yards. So if you have a...
  19. S

    Is this acceptable for high end rings? And a couple other questions

    No, it's a fact. You just match the reticle to the level, just like all other level products work. Feel free to explain how your bubble level was defective to the point where you couldnt make the reticle match it. Literally nothing you have said is an indication that any "problem" has been...
  20. S

    Is this acceptable for high end rings? And a couple other questions

    How did you physically place the ring on the precise proffesional machine your neighbor has? (We'll just ignore the fact that you can still do #2 completely unhindered here)

Latest posts

Featured Video

Stats

Threads
342,137
Messages
3,599,763
Members
78,574
Latest member
grudddg83-=5\04

Latest Articles

Top