Search results

  1. J

    6.5 PRC Load Dev - Did annealing change pressure?

    @Cactus kid no I don’t believe it’s over annealed. Annealing was done with Annealer Mark 2 DB not the flame method. I’m confused why I had increase in pressure and velocity after I annealed it and FL sized. The 59.2 load was solid with virgin brass. I wouldn't think resizing would cause an...
  2. J

    6.5 PRC Load Dev - Did annealing change pressure?

    Note on the 59 target the flier was due to really hot barrel. When I saw impact I touched barrel and it was hotter than I intended it to get. This was after already shooting 27 rounds. I immediately picked up the gun and put in truck with AC running to cool it down. After about 15 min cool...
  3. J

    6.5 PRC Load Dev - Did annealing change pressure?

    Alright all. I thought I had a really good load with 6.5 PRC, Berger 156, ADG, gm210m, and N565 @59.2. With virgin brass I had avg velocity of 3072 and .8 MOA on a 10 shot group (see first picture and second picture ). After FL resizing and trying out my new Mark 2 db annealer I loaded up...
  4. J

    Federal GM 215 - KC Scheels

    That’s their 3rd shipment this year. They received some March 24, April 24, and now August 24
  5. J

    N565 6.5 prc

    I’m using N565, Berger 156, ADG, and gm210m (26” tube). My initial load on new barrel was 59.9 with velocity of 3070 and .3 MOA. After several range trips barrel sped up over 3140. Backed down to 59.2 to get back to 3070, and holding a 10 shot group 1moa. Just got a AMP annealer and annealed...
  6. J

    How much recoil does a suppressor cut?

    Yeah I was shocked how low recoil reduction % was on 300wm with ultra 7. They are saying 8% recoil reduction compared to bare muzzle. My rifle weighs 8.5 pounds with scope and suppressor. I can tell you I definitely feel the recoil. Waiting for the new RR’s to come out. Will probably try...
  7. J

    Unknown Munitions Developed Loads Thread

    @UM GM listening to podcast shoot2hunt can’t remember what episode but Jake, Ryan, and Forum mention the 30 shot group to confirm. It was never mentioned on how the 30 shot group takes place. Do you shoot 1 round and let it cool for 60 secs or do you shoot 3 rounds and let it cool 5 minutes?
  8. J

    Gunwerks 6ix+, AB Raptor Eight Stack, CGS Hyperion K, Thunder Beast Dominus

    Would like to see review of Scythe vs Nomad TI XC. The deadair Nomax 33 sounds very interesting, rated up to a 33xc and is lighter and shorter then TB Ultra338
  9. J

    AMP Machine: 2024 I Will Have One

    UM has an annealer on their website. I would like an Amp please provide reasoning on why Amp is not worth the money?
  10. J

    Unknown Munitions Developed Loads Thread

    I know this post is older but I wanted to take my chance. Do you have any load data for a 338 Edge +P on a short barrel? All my rifles are 26” barrels and I’m looking for something different. Short barrel 20” and suppressed. I would like to run a 285 eldm or 265 ABLR. Oh and N570 doesn’t...
  11. J

    Gunwerks 6ix+, AB Raptor Eight Stack, CGS Hyperion K, Thunder Beast Dominus

    What size reflex?
  12. J

    Gunwerks 6ix+, AB Raptor Eight Stack, CGS Hyperion K, Thunder Beast Dominus

    Looking to build a 338 Terminator in a 24” barrel. Narrowed the cans down to TBAC Ultra 338 and Raptor 10 stack. Seems like if I go with Raptor I can reduce length by 3” and be just as quite, would that be accurate?
  13. J

    300 NMI vs 300 Terminator

    I’m looking to build my next gun and trying to decide on what caliber I want. I’m looking at 300 NMI vs 300 Terminator, which one would be better? I’m also interested to see if anybody has done a +P with the NMI? The build would be throated for a Berger 245 and I expect 3050ish fps with a...
  14. J

    Berger Elite Hunter 205 grain?

    No problem. I also tried N570 and H1k. I can look for my data if you need those. Just a warning man I took my loads with RL26 farther then most people do when finding pressure. I like pushing my rifle to the max and see what it’s capable of which is why I don’t stop at ejector marks or swip.
  15. J

    Berger Elite Hunter 205 grain?

    Yeah that was my accuracy load. With 78.5 it was going 3148 but with a hard bolt lift. Brass is Peterson.
  16. J

    Berger Elite Hunter 205 grain?

    It was with a 300wm 24” barrel and 75.5 grains of RL26.
  17. J

    Berger Elite Hunter 205 grain?

    I was slightly disappointed with the Berger 205s in my rifle. I did a ladder test with RL26 and stopped at 3148 with heavy bolt lift. My accuracy node was around 2960 which was disappointing cuz you get that with a Berger 215. Another thing to consider is the longer bearing surface on the...
  18. J

    ISO Manners LRH

    Oh wow. Thanks for the update.
  19. J

    ISO Manners LRH

    Do you by chance have a LRH in artic camo long action on order?
  20. J

    Berger Elite Hunter 205 grain?

    How far you running off the lands?

Latest posts

Featured Video

Stats

Threads
360,186
Messages
3,808,939
Members
81,948
Latest member
Eric_K

Latest Articles

Top