Search results

  1. Bender

    What was the first available Kifaru pack?

    Rhunter got it pretty close. The first product to my knowledge was the Longhunter frame, followed by the Longhunter bag, lid and Cargo Chair. The Spike camp, Daystalker, Rucksack (internal frame panel loader) and Lumbar Pack followed that. One of the early products was the Rambling Rifle, not...
  2. Bender

    Kifaru Lumbar Pack

    Hey guys, sorry the Hellcat run went under the radar here. We weren't expecting you all to bum-rush our initial run so fast and we sold out pretty quick. We are working on the Tailgunner 1 and Scout run right now and I will post here a couple days before we go live with them so you guys know...
  3. Bender

    Hellcat's

    Hey guys, sorry the Hellcat run went under the radar here. We are working on the Tailgunner 1 and Scout run right now and I will post here a couple days before we go live with them so you guys know what's up. We had Hellcats kicking around for a couple years after the initial run so that's why...
  4. Bender

    Kifaru Hoodlum Question - Pouches & A Bow

    TAK, the new version of the Hoodlum has bow straps sewn into the front and the bottom handle is large enough to take a bottom cam securely. It does leave your cam a little exposed however. If you add pouches it will give something for the bow to rest on / compress against and will keep it in...
  5. Bender

    Kifaru 357 mag

    That's one way of doing it! Just a heads up, the bottom of the bag is the last thing to go on and that means that the lumbar pad casing is only stitched in there with a .375" of fabric (multiple stitch lines, but only .375" of fabric) and .75" webbing on the connection points instead of 1". If...
  6. Bender

    Kifaru gen 1 military pack sizing

    Quack, the Gen 1 packs and frames usually had a thinner lumbar pad (and will probably have a very thin one by now). Our sizing has stayed the same but our lumbar pads have gotten thicker which will make the belts fit a little tighter. If you usually wear a medium and have found a Gen1 frame...
  7. Bender

    Kifaru Lumbar Pack

    We are working on them guys, Hellcat is in the works with TG1 and Scout to follow. They will be compatible with the Improved Hellcat harness and we will be selling the harnesses separately so you can upgrade old lumbar packs. We're in the middle of our busy time of the year so bear with us on...
  8. Bender

    MSR Duo to fit into Kifaru accessory pocket?

    M1KL83, I did the math on the Shapecharge pocket and it will be a tight fit for the Duo but you might pull it off. The LCP can hold a full Ursak Major if that gives you reference on size for that pocket.
  9. Bender

    Identifying Kifaru frame

    Yep, Bill is right on that. Those older frames have a Hypalon / mesh cover that goes over the top and around the torso area of the frame. Makes attaching one of our newer bags very difficult to do. If it doesn't come with a compatible bag you are gonna have a hard time matching it up with a new...
  10. Bender

    Kifaru shoulder strap length ?

    Its easier to bury the longer straps than it is to stretch out the short straps RK4. You will probably need the long straps to get the load lifters in the right spot. If you call in, our customer service people should be able to get you sorted out. 303.278.9155
  11. Bender

    DIY copycat kifaru lite duplex

    Great job Woodbow! XPE is the stuff to use. It breaks down much slower than other foams, especially from a couple rides in depressurized luggage compartments. Zote foams are also pretty good. The smaller and more consistent bubbles will generally work better as the cell walls support each...
  12. Bender

    2020 Pack Build

    Good job, looks really clean!
  13. Bender

    Sewing up the last bit of a woobie after turning it inside out or outside in, finished updated with pictures

    Zac - We leave enough open in one corner to pull the guts through and then top stitch around the perimeter. This closes up the hole and lays everything flat. I would recommend you start 2-3" before a corner and backstitch a few times to start and stop. This will keep you from having to...
  14. Bender

    New Stryker

    VAHunter, do you have the tensioner straps on the bottom of the load sling connected to the bottom of the frame? If you want to call into the shop we can help you get sorted out. 303.278.9155
  15. Bender

    Kifaru belt

    BEwinnie86, this will depend on what belt size you are getting. The Small and Medium will hold a single belt pouch per side or a Water bottle pocket and the new Mini belt pouch. The Medium can do it with the standard belt pouch and h20 pocket but will be scrunched in there (get the mini for...
  16. Bender

    Kifaru Shape Charge Frame Sheet

    Here's the frame Sealee. It has two stays and is made from 1/16" HDPE. If you have any questions feel free to email me or call us at the shop.
  17. Bender

    Kifaru 44 Mag users - couple of questions

    The Deuce was developed with some ODA guys down at Ft. Carson. They wanted to have more pals panels back there so they could attach radio mounts and medical rip outs. That carried over into the civilian design. You guys would prefer a bladder sleeve instead?
  18. Bender

    Kifaru 44 Mag users - couple of questions

    LK, the bladder sleeve on the 44 is about 11" wide, and 12" tall. From the bottom of the bladder hanger to bottom of pocket it's about 17.5".
  19. Bender

    Kifaru Quandary reviews

    The Quandary came about for when I was commuting by bike. Big enough for what you need and the sleeve below the front zipper is sized to fit a Kryptonite Fahgetaboutit U lock with the roll up part of the lid going over the front to keep the lock in. If you have to pick something up on the way...
  20. Bender

    Kifaru Sherman as daypack on Duplex frame

    Jikkyo, as Scott mentions you are going to get more room with the LCP over the Sherman. With a LCP and a Grab-it you can haul a lot of stuff with room for your essentials. The LCP can be used as a compression panel as well with a K-clip comp kit or attached to the frame with K-clips like a...
Top