Search results

  1. C

    WTT WTT tikka UM med. for low

    I have a set of unmounted medium 30mm I’d like to trade for lows. Sent from my iPhone using Tapatalk
  2. C

    Benelli SBE 1 question, Failure to Feed

    I know you don’t want to hear it but that sure cycle isn’t the best option. Once I switched to Wolff springs most of my cycling problems went away. And they are too cheap not to try. I would clean the entire trigger, lifter assembly with brake cleaner then lightly oil. I’ve also had problems...
  3. C

    Ultimate Rokslide Special: Rokstok, Tikka 223, Maven 1.2

    Man that is a pretty rifle. Sent from my iPhone using Tapatalk
  4. C

    Trijicon Huron 3-9x40mm Drop Evaluation Q&A

    Me too, I invested in several of these for that price. For an east cost set and forgot scope I don’t know what else you would want. I just wish the BDC lined better with my rifle at a 100 yard zero. Sent from my iPhone using Tapatalk
  5. C

    Suggestions for a shotgun for my boy

    I just bought my son a Retay Gordon compact 20. It has stock spacers that made fitting him very easy. It’s a Benelli clone and operats and functions identical to my SBE. Sent from my iPhone using Tapatalk
  6. C

    Painless load development (mine)

    Man that’s killer! Makes me want to try that too. That’s the problem with this place, it’ll never allow you to be content. Sent from my iPhone using Tapatalk
  7. C

    Painless load development (mine)

    Thanks all, I hit slight signs of pressure at 48 with Hornady brass. I bought some Starline and will try it again. Sent from my iPhone using Tapatalk
  8. C

    Painless load development (mine)

    42gr of H4350 Sent from my iPhone using Tapatalk
  9. C

    Painless load development (mine)

    I could use some advice on load development. I have a 17” 1:8 243 I’ve been working on this summer. Shooting H1000 and 108eldm I have found an extremely accurate load at 47gr that yesterday stacked 6 in one jagged hole and the other 4 well within 1/2 MOA. However, it’s pretty slow at an average...
  10. C

    300wm Federal Power Shock clone?

    Thanks guys. I found a load with some 168tmks I had and H4350 that shot well. I’ll probably try to stick with that powder and try a heavier bullet. Sent from my iPhone using Tapatalk
  11. C

    Maven RS1.2 2.5-15x44 new model

    That’s a great question and I’m in the same boat. I have a killer SML that I’d like to put a Maven on but can’t justify it sitting there most of the year not getting shot. With a good set of pic rings I could ideal switch this scope between rifles. I’m also thinking and putting a Maven in a set...
  12. C

    Well I caved, down the hole I go….(update)

    What height UM rings are those? Sent from my iPhone using Tapatalk
  13. C

    300wm Federal Power Shock clone?

    I just took one apart and it is 73.5 grains of powder that is stick powder but much finer than H1000 or 4831. The bullet is a flat base bullet. Sent from my iPhone using Tapatalk
  14. C

    300wm Federal Power Shock clone?

    I guess maybe I’m asking the wrong questions about this? Does anyone know the powder they are using in this load? I believe it’s a Speer bullet. Sent from my iPhone using Tapatalk
  15. C

    300wm Federal Power Shock clone?

    I have recently started working on my Browning A bolt 300wm and thus far I can’t find anything that shoots remotely a well as the federal blue box 180gr power shock. I have tried 178eldx, 180gr interlock and 165gr interlock. With 4831sc and H1000 nothing comes close to those cheap blue box...
  16. C

    Tikka fast twist 243

    For what it’s worth I’m using a Caldwell chronograph so who knows how accurate that number really is. Sent from my iPhone using Tapatalk
  17. C

    Tikka fast twist 243

    I’m running 2690fps out of a 17” tikka with 108s and 47gr of h1000. I got more speed from the 4350 but the h1000 gave better accuracy. Everything is loaded to standard tikka mag length. I’ve been very happy with this setup. Sent from my iPhone using Tapatalk
  18. C

    Thread pattern for Tikka T3x Lite in .243?

    I have 2 .243 threaded 1/2x28 one tikka at 17” and a Model 7 at 16” my gun smith had no problems at all doing it and they get shot a lot. For what it’s worth, I do run a direct thread can with a 1/2x28 mount. No adapters. Sent from my iPhone using Tapatalk
  19. C

    Best spotting scope under 1000

    Spend a couple hundred more and find a Cabelas Euro branded Meopta Spotter. I have one and I like it better than my buddies Swaro. The Cabelas branded ones seem to go for $1200-$1500 the Mepotas with the removable eye piece are around $2K. I did a lot of looking and researching, they were the...
  20. C

    Thread pattern for Tikka T3x Lite in .243?

    I’m sure it has been explained clearly somewhere, but what is the concern with 1/2” threads on a .30 barrel? I have a couple and would like to know what to be looking out for. Im shooting a Harvester with a direct thread 1/2” Bravo mount. Is the thin barrel a concern because of barrel wear? Or...

Latest posts

Featured Video

Stats

Threads
349,138
Messages
3,677,116
Members
79,866
Latest member
Lm_Danger7

Latest Articles

Top