Search results

  1. Bill V

    Iron Will Outfitters Single Bevel Broadhead Review ***Updated 2/24/21***

    The deer was standing perfectly broadside and I aimed for the top of the heart, but the deer ducked and turned into the arrow at the shot. Our new single bevel with bleeder created a square hole on entrance and broke the shoulder bone in two right by the knuckle, The double lung shot passed...
  2. Bill V

    Quiver on or off for western hunting

    Most of the guys I know leave it on, but I use a removable quiver and take it off for longer shots. Generally, if I'm shooting over 50 yards I can take a couple extra seconds to range the animal and pull off the quiver. I'd rather not have the wind pushing on it and the extra weight of the...
  3. Bill V

    *Venting* Iron Will

    I appreciate the feedback on this. We buy the epoxy prepackaged from Easton, so it's not cheap and we don't make any money on it. If we include it with every set of HIT inserts or collars, we would need to add $3 to those prices. I didn't want to do that, since a lot of guys already have...
  4. Bill V

    New Iron Will System?

    I can take a photo later, but a Deep Six broadhead has a shank 0.3 inches long before the threads start. The Snyder Core system has a shank that is 1.0 inch long before the threads start.
  5. Bill V

    New Iron Will System?

    It doesn't stiffen the spine in the same amount as cutting 3" off your arrow. I measured static spine on some shafts with and without 2.5 inches of HIT installed and they measure the same. This is because the amount of deflection is dominated by the length of the beam, which doesn't change...
  6. Bill V

    New Iron Will System?

    We have two collar sizes. Our 25 grain hardened steel collar is 1.00 inch long and our 10 grain titanium is 0.70 inches long, so neither one overlaps the HIT insert with this system. I've found with the HIT this far back and connected to the long broadhead shank, it acts like one solid long...
  7. Bill V

    New Iron Will System?

    We just added two Impact Collar sizes to our website. Our new G size will work with the .228 OD arrow.
  8. Bill V

    New Iron Will System?

    This system is for 4mm, .165/.166 ID arrows. These are generally called micros, but I agree, some companies use the terms small and micro to describe either .204 or .166. I call .204 small and .166 micro.
  9. Bill V

    New Iron Will System?

    Here are a couple of photos:
  10. Bill V

    New Iron Will System?

    I co-developed this system with Aron Snyder. We both felt strongly that there was a need for an improved system for micro diameter arrows. Here are some more details: Iron Will’s new Snyder Core System utilizes a long hardened metal core, carbon fiber (arrow), and a hardened metal Impact...
  11. Bill V

    Easton Axis high FOC build - SS Footers

    Nice work Apohlo. This is a much cheaper way to make a footer since you are cutting a tube of material. Our Impact Collars have a flange that goes over the end of the arrow which requires us to bore out the inside diameter. We do this in the hardened condition to a tight tolerance, so it take...
  12. Bill V

    Anyone shooting VAP RIP XVs with on game experience?

    We have opened up the hole on the front of our D Impact Collars so they can now be used on .204 ID arrows with standard heads. We are also adding two more collar sizes to fit more arrows. They are on our compatibility chart now and shipping soon.
  13. Bill V

    Iron Will Outfitters Single Bevel Broadhead Review ***Updated 2/24/21***

    Definitely.
  14. Bill V

    4mm Components / Not Deep Six

    When using our Impact Collars and high Strength HIT inserts, I haven't seen any problems with the Deep Six system. High Strength Ferrules, HITs, and Collars make this system pretty robust. Without the collar reinforcing the end of the arrow, Deep Six threads can be bent on a really hard side...
  15. Bill V

    IW blade replacement??

    Fullfan, the main blade is designed to have a small amount of side to side play so that it can be aligned to the ferrule. The video below explains this. On the solid blade it is harder to do by eye, but you can tighten the screw part way, spin it on an arrow with an arrow spinner, and move the...
  16. Bill V

    Victory VAP SS without any outserts?

    I'm not a fan of aluminum half-outs in case you get a hard impact, but that arrow with a steel or titanium half-out should work well.
  17. Bill V

    Iron Will Single Bevel Broadhead

    125 will be the lightest for this year at least. The blade length as well as the bevel angle determine how much rotation you get and all of my work the past year or so has been on the s125 size blade. We use that same blade in the 125 to 250 grain models.
  18. Bill V

    Need to get rid of the whisker biscuit! Help for alternative.

    I like Hamskea for a very reliable drop away.
  19. Bill V

    Iron Will Single Bevel Broadhead

    Great test video from Lusk Archery Adventures. Thanks for testing John!
  20. Bill V

    Iron Will Single Bevel Broadhead

    Here is a photo.

Latest posts

Featured Video

Stats

Threads
349,052
Messages
3,675,998
Members
79,847
Latest member
Brent0517

Latest Articles

Top