Search results

  1. C

    20in 7prc powder choice

    All of the powder that's going to burn in a barrel, burns within the first few inches. The fastest load in a long barrel will also be the fastest load in short barrel.
  2. C

    WTB Gunwerks ClymR Stock (M5 Bottom Inlet, Sendero Contour)

    Need to make sure I understand this clearly.... Are you saying they won't do an M5 inlet at all? Their site says they will. I was just getting ready to order 3 with M5 inlets so this will throw a wrench in that plan.
  3. C

    Reloading 7PRC

    With ADG brass my loaded necks are .314. Using a .312 bushing.
  4. C

    Reloading 7PRC

    I used that same data to extrapolate for the bergers, but not all 180's are created equal. The ELDM has a lot more bearing surface generates higher pressure with equal charges. There is data for some other cartridges with both bullets and the Berger routinely has a higher max charge.
  5. C

    Reloading 7PRC

    I wasn't able to find published data for that powder and bullet combo. Where did you find that?
  6. C

    Reloading 7PRC

    This squares with what I'm getting with 68.0g H1000, 180 hybrid, ADG, Win LRM, 3.375" OAL, 21" barrel + Dominus, 2847fps at 110 rounds.
  7. C

    New SG bino harness is on the way ...

    @Formidilosus - what holster and mounting method is that?
  8. C

    New SG bino harness is on the way ...

    Appreciate the help guys.
  9. C

    New SG bino harness is on the way ...

    @Formidilosus or anyone else know which size is needed for a Revic 10x42?
  10. C

    Looking for a smith in the Twin Cities MN area

    I'm sending a couple of actions back to Defiance to have new magnum bolts fitted, and I need a smith to pull the tubes before I ship them out (Defiance asking for this). When they come back I need one of the barrels spun back on (using the old bolt of course). Any recs for a smith in the Twin...
  11. C

    Suppressor choice

    I don't know about the Harvester but I have 4 TBAC Dominus and can assure you the recoil reduction is substantial. Your '06 will probably feel somewhere around 243 or at most 6.5cm recoil level.
  12. C

    Comb “flats” on EH1. How do they work for you?

    Can you elaborate on that Formid?
  13. C

    5 inch suppressor for long action or magnum cartridges?

    I have a little collection of Dominus cans that I run on barrels as long as 21". I use low rings and can't see the can in my scope even at 3x. I see no reason to get a shorter can as the Dominus CB adds less than 6" to the overall length. The sound suppression and recoil reduction are amazing. I...
  14. C

    The 7mm PRC is Here

    Gila you're only considering saami coal, but you're not taking the case length into account. For 7 PRC with a long, heavy high BC bullet seated way out you will only be at 3.33. You're not going to be anywhere near 3.5.
  15. C

    Anyway to reduce muzzle noise to reduce noise for neighbors?

    Congrats. I put 4 cans in jail last October and it's killing me watching you guys lap me. Hopefully eforms allows them to get the paper submissions cleared out a little faster.
  16. C

    Anyway to reduce muzzle noise to reduce noise for neighbors?

    I agree on the can. Check out the March Reddit NFA megathread. Most form 4's on the eform system are actually less than 90 days. What exactly is your budget on this workaround and how long will it take you?
  17. C

    One you guys might like. 6.5 PRC Deviant

    Very nice. Is that the XM action length?
  18. C

    Considering First Kifaru; 1x Frame couple of Bags

    Also give the Kifaru gun bearer consideration... works great and weighs almost nothing.
  19. C

    Considering First Kifaru; 1x Frame couple of Bags

    It's not a terrible idea, but my AMR compresses so nicely as a daypack I'm not sure why I would ever take it off. Plus it goes from daypack to meat hauler with just a few tugs on the straps.
  20. C

    Advice and guidance: 1 rifle and caliber

    I've always been that guy that didn't want the party to end 😋

Latest posts

Featured Video

Stats

Threads
346,888
Messages
3,650,950
Members
79,428
Latest member
Natty20

Latest Articles

Top