ZeroTech TRACE ADV 3-18×44 FFP Shoot2Hunt

[Marbles]

I'm tempted to get in on drop four. Already have one coming from drop two.

 

[2soups]

I'm tempted to get in on drop four. Already have one coming from drop two.

I'm hoping someone from drop one sells it and I see it before anyone else and buy it lol

 

[Marbles]

I'm hoping someone from drop one sells it and I see it before anyone else and buy it lol

Good luck, I'll not be in competition with you, need a little space between burning dollars.




@Q_Sertorius did I see you wanting to cancel the scope bumpers, or am I making crap up? If yes, why.

 

[Q_Sertorius]

Good luck, I'll not be in competition with you, need a little space between burning dollars.




@Q_Sertorius did I see you wanting to cancel the scope bumpers, or am I making crap up? If yes, why.

Yes, I am canceling my Scope Bumper orders. I don’t like them.

 

[Marbles]

Yes, I am canceling my Scope Bumper orders. I don’t like them.

Good to know. I have them coming with the one I have ordered to try out, but will wait until I try them before ordering more.
You are the first person I have heard not liking them. Any particular reason?

 

[dårlig jeger]

I'm hoping someone from drop one sells it and I see it before anyone else and buy it lol

I'm accepting offers via sealed bid pm.

That way, no one will know how much you paid.

 

[Formidilosus]

Good to know. I have them coming with the one I have ordered to try out, but will wait until I try them before ordering more.
You are the first person I have heard not liking them. Any particular reason?

I don’t like them either…. But, IMO they are the most usable option that doesn’t break in the first use, and that don’t totally piss me off.

 

[Ajsomp]

I don’t like them either…. But, IMO they are the most usable option that doesn’t break in the first use, and that don’t totally piss me off.

You’re describing nearly 90% of the industry. I’m constantly looking for that Goldilocks solution without becoming a manufacturer.

I’m long over the days of sewing my own stuff to make things work.

 

[B_Reynolds_AK]

I got a bloody knuckle from the scope bumpers recently. I took a sharp knife and it was super easy to knock the sharp edge. I was surprised how soft the 3d printed material was.

 

[BAKPAKR]

I got a bloody knuckle from the scope bumpers recently. I took a sharp knife and it was super easy to knock the sharp edge. I was surprised how soft the 3d printed material was.

I wonder if the State of California has considered requiring a consumer protection label on them yet?

 

[Formidilosus]

You’re describing nearly 90% of the industry. I’m constantly looking for that Goldilocks solution without becoming a manufacturer.

I’m long over the days of sewing my own stuff to make things work.

Just need old Butler Creek caps before they went to crap.

 

[WyldGoose]

First thing I did was file all the sharp edges off mine. They’ve worked ok for me, however the rubber bands feel like they’re losing the tension they had when new. They don’t want to flip open like they used to.

 

[BLJ]

First thing I did was file all the sharp edges off mine. They’ve worked ok for me, however the rubber bands feel like they’re losing the tension they had when new. They don’t want to flip open like they used to.

How long have you had them?

 

[WyldGoose]

How long have you had them?

November…so 8 months…

 

[Dobermann]

Just need old Butler Creek caps before they went to crap.

I'd be happy enough with my Tenebraex if they didn't break. (Shh! Don't tell the PRS-bros that ...)

 

[Formidilosus]

I'd be happy enough with my Tenebraex if they didn't break. (Shh! Don't tell the PRS-bros that ...)

I can’t stand them. They all suck.

Im going to find someone to make caps like the old BC ones….

 

[BAKPAKR]

I can’t stand them. They all suck.

Im going to find someone to make caps like the old BC ones….

I have Butler Creek caps on most of my scopes. I have only had one objective cap fail. Most are pretty old though (kind of like me ). I tend to baby my rifles, but I have actually put a few through the wringer and the scope caps have survived (except for that one).

Do you happen to know what size Butler Creek caps will fit the S2H scope? Based on the post by @Lane Avery above, sounds like I might need them in October…

 

[Svivian]

I can’t stand them. They all suck.

Im going to find someone to make caps like the old BC ones….

And for the same price as the old ones.

Even with the discount through UM, the cost for scope bumpers is alot for what they are

 

[Formidilosus]

I have Butler Creek caps on most of my scopes. I have only had one objective cap fail. Most are pretty old though (kind of like me ). I tend to baby my rifles, but I have actually put a few through the wringer and the scope caps have survived (except for that one).

They average 2-3 weeks of hunting use on a pair for me, and not even a one week class at S2H between broken ones. Thought the yellow button made in America versions might be better, but one broke on a students rifle at the winter course the second day or so.

Do you happen to know what size Butler Creek caps will fit the S2H scope? Based on the post by @Lane Avery above, sounds like I might need them in October…

I don’t, but I will find out next week.

 

[Formidilosus]

And for the same price as the old ones.

Even with the discount through UM, the cost for scope bumpers is alot for what they are

I’d happily pay $50-$60 for legit BC caps. I have several sets from the 90’s that still work perfectly.