Your go to Broadheads!?

nphunter

WKR
Joined
Jul 27, 2016
Messages
1,971
Location
Oregon
Mind elaborating on the G5 deadmeat for elk? Curious to its durability, penetration, wound entry and exits, and blood trails. Shot distances and quartering angles if you don’t mind! Thanks
Durability’s great, I’ve had one break like a 1/8” piece off of the tip of one blade. The rest have looked almost new after passing though elk. The main reason I went expandables is because I’m color blind and can’t really see blood.
This one spun at like 43 yards and shot him through the front of his shoulder and almost buried it to the fletch Died less than 100 yards away. Did gutless and it was 1am when I quartered him so I didn’t open his chest up and find the head.
94EB7395-10C8-4196-AB2F-4BB3C8B9C224.jpeg

This one was 60 yards, arrow went all the way though and hung up in the skin on exit. He fell on it and shoved it back in. Perfect broadside, bull went about 40 yards and fell over like 30 feet from my hunting partner, no blood trail needed.

9FF84519-BEAA-435A-B0CD-EE31DB7A7691.jpeg
That’s the exit
0CE3CBC8-6881-41EF-95C1-247617A2BA09.jpeg

58 yards and he was like 80’ elevation below me on a super steep hillside. Clean though, The wife called this bull in. Great blood even though I had a high rib/lung entrance, it was pouring rain too, bull went about 70 yards.
BBFDE318-0326-4E30-9E50-8BCE369DE8E6.jpeg
The exit
6273E110-EA62-4EDD-AFB4-66970FDBCD37.jpeg
The head
EBB446DC-C610-4C38-A9DE-D27C78CC2EB6.jpeg

Here’s a head my son shot all the way through a 4 point mule deer. 28.5” draw, 45lbs and 400gr arrow. Most of the heads you can’t tell apart from new ones after taking them apart and cleaning them.
A3F134EF-0E53-4057-99A4-DB3D9D134D2F.jpeg
Broadside, the buck went less than 100 yards but was still hard to find in the deep sage. You can see the entrance in front of his quiver.
B407C4BC-C275-4AAA-850B-7E1783BCDCEF.jpeg


I don’t really take many hard quartering shots. My son took a shot on another 4 point buck last year and made a super hard quartering shot. It’s was poor shot placement and the arrow went in through the ribs and exited through right above his hip socket and stayed in the buck. He had to make a follow up shot but the buck didn’t go anywhere and the broadhead did its job. It was a good lesson for him on taking quartered shots. I’ve only taken two hard quartering shots, one with a fixed head on a buck and hit him in the ass when I was younger and I lost him. I also took a quartered toward shot on an antelope and put a rage Trypan through his shoulder blade and it came out in front of his rear quarter. I wouldn’t take a hard quartered shot in a bull. I’ve shot 3 bulls in the shoulder in my life and all three took off with my arrows. One with a sharp fixed head at under 20 yards, I do everything I can to avoid the shoulder on an elk.
The Trypan is another great elk head and is very durable. I’m switching to evolution heads this year because of the glue in option, i kept all of my dead meats though because they are great heads.
 
Last edited:

JK47

Lil-Rokslider
Joined
Apr 13, 2024
Messages
111
Location
Right here
This has been a good read. I am increasing my draw weight and have to buy new arrows. Basically start from scratch.

I have some G5 Megameats and Grim Reaper mechanicals, but am hoping to tune my set up for fixed blades. I have some new QAD Exodus 125 swept blades and G5 Stryker V2’s. I’ve used the Montecs, but they’re pretty loud compared to the G5 Stryker V2 and Exodus.

Guess we will see what I end up with.
 
Joined
Aug 4, 2014
Messages
2,277
Location
Phoenix, Az
I have been a diehard 100 gr 3 blade Wacem broadhead guy for probably 15 years. Over the last 3 years tho, I started shooting gravedigger mechanical's with cut on contact tips. The blood trails have been the best I have ever seen. Flight true like a fixed blade except a huge and instant blood trail. I have not shot an elk with them yet, but am thinking this might be the year I give them a go.
 

nphunter

WKR
Joined
Jul 27, 2016
Messages
1,971
Location
Oregon
This has been a good read. I am increasing my draw weight and have to buy new arrows. Basically start from scratch.

I have some G5 Megameats and Grim Reaper mechanicals, but am hoping to tune my set up for fixed blades. I have some new QAD Exodus 125 swept blades and G5 Stryker V2’s. I’ve used the Montecs, but they’re pretty loud compared to the G5 Stryker V2 and Exodus.

Guess we will see what I end up with.

I tune my bow with fixed heads but love mechanicals. I just shot the cold bow challenge with fixed heads. I still think the most important factor in penetration is great arrow flight and the most important in killing animals is shot placement. I just love the giant holes mechanicals make, it make after the shot so much less stressful than when I use to shoot fixed heads.
 

Maxhunter

WKR
Joined
Mar 31, 2012
Messages
400
Location
Wyoming
I’ve been using Magnus Buzzcuts in 125 for years. They shoot great at any range and put animals down quickly. Lots of good choices out there.
 

owtuvdorz

FNG
Joined
Jan 4, 2019
Messages
10
I like shooting the G5 montec's because they shoot same as my field points. The new Montec's, solid body, are noticeably quieter than the older version.

Sent from my nami using Tapatalk
 

JK47

Lil-Rokslider
Joined
Apr 13, 2024
Messages
111
Location
Right here
I like shooting the G5 montec's because they shoot same as my field points. The new Montec's, solid body, are noticeably quieter than the older version.

Sent from my nami using Tapatalk
Oh nice. I haven’t tried the solids yet. I may pick some up.
 

JK47

Lil-Rokslider
Joined
Apr 13, 2024
Messages
111
Location
Right here
I tune my bow with fixed heads but love mechanicals. I just shot the cold bow challenge with fixed heads. I still think the most important factor in penetration is great arrow flight and the most important in killing animals is shot placement. I just love the giant holes mechanicals make, it make after the shot so much less stressful than when I use to shoot fixed heads.
Agree on shot placement being crucial. And on mechanicals opening holes you could throw a baseball through. I will likely use one this year on something.

Actually, I carry both types of heads in my quiver. Last year was a couple Grim Reapers, couple Montecs and a judo. This year I have a 6 arrow quiver…..choices…..
 

WYndy1

FNG
Joined
Jul 9, 2024
Messages
15
Location
Wyoming
I'll 2nd the QAD Exodus. Used for several season now hunting antelope, mules and elk from the northern plains to the High rockies. Tune well, fly good, tough as nails, easy blade changes and a good price point.

My daughter has used them 2 seasons on her crossbow with good results as well
 

GreggB

FNG
Joined
Aug 7, 2022
Messages
32
Started shooting Rocket Steelheads in the early 90's and stuck with them until Rage Hypos. Then went to the Trypan which was my favorite mechanical. Due to age, I now hunt at 52 lbs. and went to a 125 grain Magnus Black Hornet w/bleeders 3 years ago. I'll probably stay with them forever because they have proven to be excellent deer killing heads. The arrow in my avatar is the result of a Black Hornet.
 
Joined
Aug 14, 2023
Messages
41
Location
Western PA
I dont see myself switching from Magnus Black Hornets (non-serrated) anytime soon. Price is good, and if one ever breaks, they have a lifetime guarantee.
 

Superx3

FNG
Joined
Sep 10, 2023
Messages
51
Location
Tx panhandle
I don’t hunt much with my bow but have killed a Texas panhandle mule deer and a couple coyotes with slicktrick 125s. Simple and no worrying about them opening or not. Massive hole that doesn’t close up
 

KeithO

FNG
Joined
Jul 23, 2024
Messages
6
Are Rage




Muzzy Trocars, got tired of mechanical broadheads blades breaking off in the animal and then finding it later while butchering it or eating it. Doesn't add any flavor.
 
Joined
Mar 7, 2015
Messages
10
I have used muzzy 100 grain fixed blade broad heads for years. They aren't fancy and they are inexpensive but I've never had a problem with elk deer or moose.
 

R7RMag

FNG
Joined
Nov 12, 2024
Messages
22
Been shooting boring ole muzzy 3 blade 100's since 2004 (if I recall correctly).

They shoot very well, are tough and reliable. Never had a reason to change. Matter of fact, been using the same 6 pack for a decade, just put fresh blades in the ones that get run through an animal and use old blades for practice

Used them on blacktail, whitetail, blackbear, elk from 3 different bows.

Animals taken from 5 to 56 yards (56 being the elk in my avatar).
I second this. I shoot a muzzy trocar and the first buck I shot with it at 30 yards, it zipped right through and so far into the short grass on the other side I never could find the arrow. Same thing with the second buck at 35. Accurate, good blood trails on both and pretty gnarly exit holes
 

Latest posts

Featured Video

Stats

Threads
349,591
Messages
3,682,554
Members
79,976
Latest member
txlmbjck
Top