Wool Grid "Fleece" or Wool R1 Air style hoody?

OP
The Ri Guy
Joined
Nov 6, 2017
Messages
582
Location
WA
I weighed my OG High E hoodie in medium and it weighs ~19.6oz. My R1 fleece in medium is pretty much on point with the Patagonia website at 11.8oz. But the Voormi label has the wool content at 48%, polyester 39%, nylon 11%, Lycra 2%.
How do you like it? Does it get much use?
 
Joined
Sep 11, 2017
Messages
1,316
Location
Bozeman, MT
Any reason you aren’t looking at the polartech alpha options? The Sitka Kelvin active has been my favorite lightweight mid layer by FAR

I’ve tried many of the other grid fleece and merino wool blend offerings. All fell short for me, either too hot, dry very slowly, and/or have durability issues.


Sent from my iPhone using Tapatalk
 

mxgsfmdpx

WKR
Joined
Oct 22, 2019
Messages
5,777
Location
Outside
Any reason you aren’t looking at the polartech alpha options? The Sitka Kelvin active has been my favorite lightweight mid layer by FAR

I’ve tried many of the other grid fleece and merino wool blend offerings. All fell short for me, either too hot, dry very slowly, and/or have durability issues.


Sent from my iPhone using Tapatalk
Too warm.
 
Joined
Sep 11, 2017
Messages
1,316
Location
Bozeman, MT
I have an Ambient that I like a lot, but prefer natural fibers, or natural fiber dominant blends, where possible.

Also find it a bit hot to hike in.

Haven’t used the ambient, it seemed a bit warmer than the Active. Interesting to get two comments on the active being hot. I run extremely warm and sweat like an absolute mother, doesn’t matter if it’s 70 degrees or zero. The kelvin active is the only mid layer I’ve ever had that can keep up with the moisture while hiking. It’s way cooler for me than any merino mid layer I’ve used. That’s the reason I like it so much, it’s comfortable in a gigantic temperature range


Sent from my iPhone using Tapatalk
 

mxgsfmdpx

WKR
Joined
Oct 22, 2019
Messages
5,777
Location
Outside
Haven’t used the ambient, it seemed a bit warmer than the Active. Interesting to get two comments on the active being hot. I run extremely warm and sweat like an absolute mother, doesn’t matter if it’s 70 degrees or zero. The kelvin active is the only mid layer I’ve ever had that can keep up with the moisture while hiking. It’s way cooler for me than any merino mid layer I’ve used. That’s the reason I like it so much, it’s comfortable in a gigantic temperature range


Sent from my iPhone using Tapatalk
Patagonia R1 air out performs it for me here in Arizona. Durability isn’t great though as you mentioned.
 
Joined
Sep 11, 2017
Messages
1,316
Location
Bozeman, MT
Patagonia R1 air out performs it for me here in Arizona. Durability isn’t great though as you mentioned.

I wonder if relative humidity has something to do with that. I’m in MT, where it’s quite a bit more humid. My little time in Southern Utah desert country taught me that performance clothing sometimes changes the way it behaves in those ultra dry climates.


Sent from my iPhone using Tapatalk
 

Hondo

WKR
Joined
Jan 2, 2020
Messages
380
Marmot made a 1/4 zip hoody called the Powertherm that utilized Polartec Powerwool grid fleece. I picked one up on ebay a few years back and it has been one of my favorite pieces. Sixsite also used Polartec Powerwool in some of their base layers. Good stuff.
 
Joined
Oct 4, 2022
Messages
10
How do you like it? Does it get much use?
My original intention was to use it as a midlayer, but the sleeves fit snug on my forearms so I use it as a heavyweight baselayer that is worn as an outerlayer and it's not so fragile as typical lightweight merino/merino-blend baselayers. It does well for me as an insulating layer with a little wind protection but breathable enough to help not overheat for temps lower than 50 deg or in breezy situations in warmer temps.
 
Top