What loades for Barnes LRX .264 127gr

[trad_bowhunter1965]

I just picked up two boxes of Barnes LRX 127 gr I think of using H 4350 in my 260 Remington, What are your guys using in similar setups?

 

[Bsnyder]

260 rem 22 in barrel, 41 grains or hybrid 100 v, shoots 3/4 at 100.26 nosler 90 grains of Hodgen us869 at 3490 FPS and holds half moa out to 700 as that’s as far as I’ve tested it,

 

[cali_hornhunter]

H4350 using 40.5 grains 3 shot average is aboutb2750 FPS sub MOA to 650. Killed my AZ deer with this exact bullet @600 yards this year

 

[Bsnyder]

H4350 using 40.5 grains 3 shot average is aboutb2750 FPS sub MOA to 650. Killed my AZ deer with this exact bullet @600 yards this year

how did the lrx open at that speed mine have all come from hot rod calibers the 260 hasn’t killed anything for a few years

 

[SDHNTR]

I’ve got a custom 700 with a very, very tight chambered, 1-8 twist pac nor barrel on it. I got obvious pressure signs with that bullet at 42 gr H4350. FWIW, I also got pressure here with the 120 TTSX. Backed it down to 41.7 and pressure signs were faint (ejector wipe) and barely there. Found a happy place at 41.5 gr and the LRX stuffed in .065 off the lands. Shoots about 1/2-3/4 moa at 2690 FPS, 21” bbl.

 

[cali_hornhunter]

how did the lrx open at that speed mine have all come from hot rod calibers the 260 hasn’t killed anything for a few years

Honestly don’t know. This year first year using the copper bullets I’ve shot 2 deer black tail and muley both in and out seem to have exit wounds about nickel to quarter size honestly can’t remember. this includes seeing the same bullet inter a shoulder on a desert bighorn out of a 270 zip right through it. But I’ve had great success with accuracy especially long ranges

 

[Bsnyder]

Thats good to here all of my impact speeds have been above 2000 fps at the target and results have been awesome i was just wondering about that with the slower impact of the 260. Thanks.