What is your load for the 127g LRX?

[thinhorn_AK]

Got 4 boxes of the 127g LRX, wondering what your go to is with these bullets.

thanks!!!

 

[VernAK]

270?

 

[Jeremyc_1999]

What caliber?

 

[MidGAHunter]

What caliber?

This would help. The 127 LRX out of a 6.5 CM/.260/etc would be way different than a 6.5 PRC, etc.

 

[handwerk]

In my CM it's 43g of RL 17, but I suspect RL 16 would do just as well.
I load for both my daughter and my rifles, the bullet was easy to work with and performed great on the 2 pronghorn we shot last year.

 

[Bater]

270?

What caliber?

What caliber other than 6.5 do they make a 127?

 

[thinhorn_AK]

Sorry my bad. 6.5 creedmoor.

 

[thinhorn_AK]

In my CM it's 43g of RL 17, but I suspect RL 16 would do just as well.
I load for both my daughter and my rifles, the bullet was easy to work with and performed great on the 2 pronghorn we shot last year.

Thank you!!! I do have rl17 on hand.

 

[Jeremyc_1999]

What caliber other than 6.5 do they make a 127?

Calibers, not bullet diameter, but here are a few calibers.
6.5 creedmoor, 6.5x55 swede, 6.5x47 lapua, 6.5 SLR, 264 win mag, 26 Nosler, 6.5-300 wby, 6.5-06, 6.5-0.6ai, 260 ai, 6.5x284, 6.5 PRC, and I could keep going on wildcats. I am using the 127 lrx in my 26 Nosler and have been considering it for a 260 as well. if you are loading a 6.5 creed and I give you load data for a 26 nosler you will blow up your gun

 

[ericwh]

.... Anyway... here's my 6.5cm 127 LRX load. It is over max but over length as well.

Hornady Brass
2.263 CBTO (2.860 COAL)
41.2gr H4350
2725fps

Very low SD/ES with that load.

Also had very low SD/ES between 39.5-40.5 grains but that was a little slower than I wanted.

 

[Mike S]

In my 6.5-06 I load with H4831SC to 3000 fps. Killed the bull in my avatar picture with that load.

 

[doverpack12]

I had good luck in my 260 with Superformance and the 127 LRX

 

[Wrongside]

IMR4451 and H4350 have worked well for us w/ the 127LRX in the 6.5CM, across a few rifles.

 

[Mightyman]

Anyone have a good load for a 260 and the 130 grain Bergers?
thanks

 

[JimGa]

45.0 H4350 in Lapua brass, 45.5 in Remington. You'll see the 45.0 H4350 with a 130 mentioned a lot, you'll be right around it.

 

[wyosam]

I don’t remember exact charge (I’ve switched to hammers) but I was around 43 grains of RL16 with great results.


Sent from my iPhone using Tapatalk