Since this, is a problem for, many Archers and Bow Hunters, shooting PSE Bows and others with, Vane "clearance issues", I thought, I'd like to, re-iterate some of what's been said,.. and my findings, on this subject.
I personally love, my PSE bow BUT, it's been a PITA to "set-up" and get to shoot consistently well, due to some clearance issues with the vanes hitting, the Riser and my new, QAD ultrarest. So here's what "worked" for me,...
The 2.5 inch, VanetTec, V Max vanes, 4 Fletched, 90* w/ some Helical. They steered FIXED blade, Broadheads ( the VPA 100 gr. vented, 100 gr Strikers, 100 gr. Wac'em's, etc. ) very well, out of my 55 pound, PSE DNA SP bow. My arrows shoot like, Darts, now with, 14% FOC ( 50 gr insert and 20 gr Fact ) for a 458 - 460 grain Arrow, built on 340 Gold Tip's,.. and they Penetrate, super ! I use a 5 Pin sight, 30-70 yard pins and they all fit well, in the sight housing. But, most importantly, the Vanes finally, CLEAR, everything !!
I will also be trying the VaneTec, 3" Super Spines, 4 Fletched, as shown by, mfllood3800, 2 posts above, the red and orange, VanTec's. Several archers, have said that, they also "work" very well, w/ fixed B-H's. I plan to find out for myself. My son and grandson, are using 3" Max Stealths ( a slightly Taller Vane ) 3 Fletched, W/ heavy Helical, with great success.
Both types of, VaneTec's and the Max Stealth, are quiet, vanes ( important to Hunters ! ). Note; the 4 fletched, 2.5" V Max, flew better than, 3 of, the 3" V-Maxes for me and my "set up". I noted that, like mfllood said, my arrows "bottom" section, cuts about1/2 way thru, the top side of, the Berger hole with, a fairly high Nock point that seems, to be needed on, PSE bows. Hopefully, this may help someone with, these "problems" ! good luck !