Ultralight Titanium Stove For Hot Tent

[HighUintas]

Still no tent. But I'm excited to use my stove at some point. It might be worthwhile getting a stove jack and welding it into a tarp. I could at least then use it under a shelter and have that nice fire warmth without the smoky clothing

 

[HuntFishCamp]

I've got swatches inbound to test for the stove storage. If anybody has any design ideas, lmk. My favorite design is Argali's, but probably with a zipper only on one side. Not sure if it should be the short or long edge.

Did you make a storage bag? I’m on the hunt for one for my 18” stove. I would like to be able to fit the stove, stovepipe, belly and spark arrestor in the same bag. 19”x9”x4” minimum
Kuiu has a bag that is built for items with sharp corners, Large would probably fit it well.

 

[gtriple]

Did you make a storage bag? I’m on the hunt for one for my 18” stove. I would like to be able to fit the stove, stovepipe, belly and spark arrestor in the same bag. 19”x9”x4” minimum
Kuiu has a bag that is built for items with sharp corners, Large would probably fit it well.

I’m still working on it. The person I contacted was supposed to send swatches and never did. So now I’m looking at ordering the material myself.

 

[uglymud]

I made a simple storage bag up. I've not had much sewing practice but it looks like it will work. I added some snaps to keep the bag closed. Still working on a nice way to store the pipe and belly of the stove. Right now I have it in a sewn tube without a lid.

Sent from my SM-S908U using Tapatalk

 

[gtriple]

I made a simple storage bag up. I've not had much sewing practice but it looks like it will work. I added some snaps to keep the bag closed. Still working on a nice way to store the pipe and belly of the stove. Right now I have it in a sewn tube without a lid.

Sent from my SM-S908U using Tapatalk

What material did you use?

 

[uglymud]

What material did you use?

Some xpac v21, had it laying around for a couple projects I'm planning.

Sent from my SM-S908U using Tapatalk

 

[renagde]

For those interested, I have storage tubes available to buy. They telescope so they can fit either the 12” or 18”. You can roll up the stove pipe, roll the body around that, take the spark arrestor out of the damper, put all that through the damper and place that in the tube. Keeps everything tidy and clean.

 

[atmat]

How much and what’s the weight?

 

[renagde]

How much and what’s the weight?

Weight is just over 8oz and I'm going to sell them at cost. Should be right around $15 shipped depending on your location.

 

[BigDuckHunter]

Weight is just over 8oz and I'm going to sell them at cost. Should be right around $15 shipped depending on your location.

Count me in for one.

 

[atmat]

Some xpac v21, had it laying around for a couple projects I'm planning.

Sent from my SM-S908U using Tapatalk

Would you have any interest in making another? What was the weight on it?

Any solution for the pipe?

I like OP’s storage tube but 8oz is hefty.

 

[gtriple]

Would you have any interest in making another? What was the weight on it?

Any solution for the pipe?

I like OP’s storage tube but 8oz is hefty.

I messaged the guys at LS Wild about making some storage solutions. I'll check in with them

 

[uglymud]

Would you have any interest in making another? What was the weight on it?

Any solution for the pipe?

I like OP’s storage tube but 8oz is hefty.

I'm not sure my sewing skills are up to making gear for other people lol.
Case is 2.35oz for the 12" stove. So far all I have for the pipe/belly is a roughly made tube, I'm going to remake it and probably just make a lid that slips over the top.

Sent from my SM-S908U using Tapatalk

 

[atmat]

I'm not sure my sewing skills are up to making gear for other people lol.
Case is 2.35oz for the 12" stove. So far all I have for the pipe/belly is a roughly made tube, I'm going to remake it and probably just make a lid that slips over the top.

Sent from my SM-S908U using Tapatalk

Beggars can’t be choosy! I need something

 

[Valcourt24]

@renagde Are you still making these, I love the design and weight... also did I read somewhere you are local to Alberta as well? I might be interested in purchasing one in the spring of 2026 if you are still making them by then. Unfortunately I have no hunts planned where I would need a titanium stove this year and my budget is tapped.

 

[renagde]

@renagde Are you still making these, I love the design and weight... also did I read somewhere you are local to Alberta as well? I might be interested in purchasing one in the spring of 2026 if you are still making them by then. Unfortunately I have no hunts planned where I would need a titanium stove this year and my budget is tapped.

Yes, I am working on making another small batch. Should be ready to ship in a bit. I am not local to Alberta though.

 

[HuntFishCamp]

Should do the trick. 75 mm rubber end caps from Amazon connected by paracord down the middle. Asked family to sew a case for the stove with 2 layers of cordura. Cheap light and simple

 

[ezwy]

Still no tent. But I'm excited to use my stove at some point. It might be worthwhile getting a stove jack and welding it into a tarp. I could at least then use it under a shelter and have that nice fire warmth without the smoky clothing

I got a $100 slumberjack outpost tent on sale and had my mom sew a $30 luxe outdoors stove jack in it....

 

[ezwy]

For those interested, I have storage tubes available to buy. They telescope so they can fit either the 12” or 18”. You can roll up the stove pipe, roll the body around that, take the spark arrestor out of the damper, put all that through the damper and place that in the tube. Keeps everything tidy and clean.

Thats really clean. probably going to need one. That tube and the 3 sides of the stove for the other piece, right? like the picture by @HuntFishCamp above?

 

[Conrad101st]

I have one of renegade storage tubes. Works as one would expect. Keeps stuff from getting dinged up.