Tuning Mathews Lift 33

[Matt G.]

So got a new to me lift. Person bought last December and barely used it. Looked to be in new condition. I switched out the mods. Thought I had in tune noticed cable had some wear. Just thought due to match strings. Got some gas strings and top hat kit. Then new strings had wear in same spot. After having to reserve the same end loop 3 times, figured out there was a lip on the mod that was cutting the serving. Not only that issue, but those mods keep rattling loose. Hopefully Appling more loctite fixes this.

On the tuning side, I have it shooting bullet holes at 13/16 but now have the cable on top cam rubbing cable during the draw. How much is too much? My OCD is probably not going to let me live with that. Anyone else have issues with the mod coming loose and cable rubbing cam?

Sent from my SM-S921U using Tapatalk

 

[OR Archer]

Did you route the cables correctly through the roller guard? That can cause unnecessary lean in the cam if done incorrectly. They should never rub on that bow

 

[dkime]

So got a new to me lift. Person bought last December and barely used it. Looked to be in new condition. I switched out the mods. Thought I had in tune noticed cable had some wear. Just thought due to match strings. Got some gas strings and top hat kit. Then new strings had wear in same spot. After having to reserve the same end loop 3 times, figured out there was a lip on the mod that was cutting the serving. Not only that issue, but those mods keep rattling loose. Hopefully Appling more loctite fixes this.

On the tuning side, I have it shooting bullet holes at 13/16 but now have the cable on top cam rubbing cable during the draw. How much is too much? My OCD is probably not going to let me live with that. Anyone else have issues with the mod coming loose and cable rubbing cam?

Sent from my SM-S921U using Tapatalk

Please post pictures of the bow so we can see how to cables are routed


Sent from my iPhone using Tapatalk