Triple 6 Update/Delay

[Unknown Suppressors]

Still planning on doing an OG22 group buy?

Short answer, yes, not sure when! We will let everyone know when it is coming!

 

[Gstew1930]

Still planning on doing an OG22 group

Short answer, yes, not sure when! We will let everyone know when it is coming!

Sounds good thank you

 

[Nosteponsnek]

what will be the max barrel diameter for the og 6?

 

[Chris84]

Short answer, yes, not sure when! We will let everyone know when it is coming!

Can you share any size info about the OG22? Trying to decide if it's worth it compared to just getting two 6's. Thanks

 

[Kaleb]

Can you share any size info about the OG22? Trying to decide if it's worth it compared to just getting two 6's. Thanks

Me too. I/we shoot mostly 22 cal but do have a few 6mm's too. If the 22 is better shorter lighter I'm in. If it's a toss up getting the OG6 might make more sense for me.

 

[Foster_65]

@Formidilosus
In your testing, how do you think the og6 would compare to the OG65 on a 6prc or 6um? Will they be about equal in suppression considering 6 is caliber specific or will the 65 still offer more suppression with the increased can volume.

 

[Formidilosus]

@Formidilosus
In your testing, how do you think the og6 would compare to the OG65 on a 6prc or 6um? Will they be about equal in suppression considering 6 is caliber specific or will the 65 still offer more suppression with the increased can volume.

It seems like (so far) that the OG6-S is a touch quieter on 6mm’s than the OG65.

 

[Escalante11]

It seems like (so far) that the OG6-S is a touch quieter on 6mm’s than the OG65.

Sign me up!

 

[9487329]

Will the og22 be rated for higher rates of fire through 10.5" 556?

 

[Formidilosus]

Will the og22 be rated for higher rates of fire through 10.5" 556?

How would you mount an OG22 on a 10.5” barrel?

 

[9487329]

How would you mount an OG22 on a 10.5” barrel?

You know, now that I think about it, that’s an excellent question

 

[texag10]

20" barrel, cut to 10.5", drill gas port for pistol length gas, mount OG 22 just to be difficult.

 

[Cory_Shoot2Hunt]

20" barrel, cut to 10.5", drill gas port for pistol length gas, mount OG 22 just to be difficult.

It’s fully titanium and has limitations. While 99% of ppl won’t exceed those limitations, I think a 10.5 AR with a bunch of rounds in a short time will exceed those.

 

[schmidty3]

It’s fully titanium and has limitations. While 99% of ppl won’t exceed those limitations, I think a 10.5 AR with a bunch of rounds in a short time will exceed those.

(I think the insinuation is that a can that reflexes 3" will most certainly hit any kind of gas block situation you could come up with)

 

[Cory_Shoot2Hunt]

(I think the insinuation is that a can that reflexes 3" will most certainly hit any kind of gas block situation you could come up with)

Haha for sure, I’m more being difficult back and saying on a short AR if you had a oddball setup that it would fit on, you would need to remember there’s limitations.