Triple 6 Update/Delay

[cwitt]

Any chance these will handle a 25 cal?

Don’t want to name names to get anybody in trouble but somebody in the booth at the expo said they didn’t see an issue as long as everything lined up correctly.

 

[RancherJohn]

Don’t want to name names to get anybody in trouble but somebody in the booth at the expo said they didn’t see an issue as long as everything lined up correctly.

I was told it will be very tight and should be checked with an alignment rod on any rifle larger than 6mm.

We had the opportunity to shoot some of the protoypes last week. Testing is ongoing, but I was impressed with the size and performance of the Triple 6 that I used. I believe the differences between protoypes were all internal, but here is a picture of a Triple 6 on a 16" barrel next to an 18" barrel with Griffin minimalist taper adapter. There was another prototype in heavy use that bested mine in performance (both sound/tone and flash reduction).

 

[Unknown Suppressors]

I was told it will be very tight and should be checked with an alignment rod on any rifle larger than 6mm.

We had the opportunity to shoot some of the protoypes last week. Testing is ongoing, but I was impressed with the size and performance of the Triple 6 that I used. I believe the differences between protoypes were all internal, but here is a picture of a Triple 6 on a 16" barrel next to an 18" barrel with Griffin minimalist taper adapter. There was another prototype in heavy use that bested mine in performance (both sound/tone and flash reduction).

The bore on the new 6mm can is such that it is going to be .223/6mm only.

 

[Unknown Suppressors]

The bore on the new 6mm can is such that it is going to be .223/6mm only.

MMMMAYYYBE 25 cal, definitely not 6.5

 

[Bowfinn]

I was told it will be very tight and should be checked with an alignment rod on any rifle larger than 6mm.

We had the opportunity to shoot some of the protoypes last week. Testing is ongoing, but I was impressed with the size and performance of the Triple 6 that I used. I believe the differences between protoypes were all internal, but here is a picture of a Triple 6 on a 16" barrel next to an 18" barrel with Griffin minimalist taper adapter. There was another prototype in heavy use that bested mine in performance (both sound/tone and flash reduction).

View attachment 1026529

Wow, that’s cool to see. Does this only add 3ish inches to OAL?

 

[RancherJohn]

Wow, that’s cool to see. Does this only add 3ish inches to OAL?

Yes, not sure the exact measurement past the end of the barrel but just seeing it next to my 18" barrel with the griffin as a thread protector was impressive. You could close your eyes on the range and clearly hear the difference between some of the cans being used, but tone (both good and bad) was way easier to discern than minute differences in db.

 

[Bowfinn]

Yes, not sure the exact measurement past the end of the barrel but just seeing it next to my 18" barrel with the griffin as a thread protector was impressive. You could close your eyes on the range and clearly hear the difference between some of the cans being used, but tone (both good and bad) was way easier to discern than minute differences in db.

Regardless of the actual OAL increase is I’d say it’s short enough for me.

 

[Unknown Suppressors]

finished design will be 3" and 3". Original design was 2" and 4". 6" overall, 1.625 diameter, going to be around 6oz, we have prototypes that are lighter than 6 and some that are heaver than 6. Our current best prototype is 6.2 oz IIRC.