*******Update- 2nd drop test on the Huron**********
Since the original test did not include locktited base ring bolts, I pulled the scope, cleaned the bolts and applied Vibratight. Let it stand per instructions for 30 mins then reattached scope at 65"lbs.

Cone stayed the same.
Had a buddy spotting for me and he numbered the shots differently than I normally do. Regardless the shots/drops are below
C= confirm-no drop and confirming after established cone that rifle is on
What would have been my 1st shot after a drop is #2
#2 left 18" in the cone
#3 top 18"shift right in the cone
#4 right 18" shift left in the cone
#5 left 36" significant shift to the left
#6 top 36" in the cone
#7 right 36" in the cone
#8 left (3) 36" shifted left
#9 top (3) 36" shifted up
#10 right (3) 36" shifted right and out of the cone
Total of 15 drops and 10 shots today. 21 drops in total
I am uncertain what this tells me. I can state the group size increased by ROM 2"ish from the drops. This looks promising in that the shift was not as significant as previous test. I doubt the shifts would cause anyone to miss a deer from 300 yards and in.
I'll send this to Form for final testing later this week.