WTS Tikka T3X Superlite barrel 6.5cm 21" w/ TBAC CB Brake

[gtriple]

Barrel was chopped to about 21" and threaded 9/16x24 by TBAC and then a face-mounted CB Brake was installed. The brake sells for $125 and to chop and thread was another $150.

Preferably this would go to someone running a TBAC CB suppressor since it already has the brake timed and mounted.

I've been holding onto this barrel just in case I wanted to reinstall it because it shot excellent groups with the Hornady Precision Hunter ammo.

$250 shipped

 

[gtriple]

bump

 

[gtriple]

ttt

 

[rcook10]

Mileage?

 

[gtriple]

Mileage?

Sub 100 rounds for sure

 

[gtriple]

bump

 

[Moccasin]

PM sent

 

[gtriple]

^

 

[gtriple]

Up

 

[gtriple]

^

 

[gtriple]

^

 

[gtriple]

up

 

[Hnthrdr]

Would you sell without the brake?

 

[gtriple]

Would you sell without the brake?

Maybe, but just want you to be aware that this is threaded for a face-mounted CB from TBAC. Here's TBAC's response. If anyone wants to buy it just to chop it further and re-thread, that would be fine.

"The barrel has standard 9/16x24 threads but does not possess an adequate shoulder for a shoulder indexed muzzle device, thus the Face Mount application. If they were just running a brake or flash hider, with no intention of using a suppressor, that should be ok. We would not recommend using a suppressor mount on that barrel that was not muzzle indexed by a gunsmith on a lathe to ensure alignment."

 

[Hnthrdr]

Thanks for the explanation