Same rifle as before, just cleaning up the ad.......
Tikka T3 action
Aftermarket LA bolt stop, shroud and bolt handle. Bolt is spiral fluted from LRI
25.75" Brux barrel (from muzzle to front of action; measures 0.600" at muzzle so a #2 contour)
no muzzle threads
8 twist
Manners EHTA stock - swamp camo - pic rail with cup up front, flush cup bottom rear and left side
Barreled action and bottom metal cerakoted a sand-esque color to match the stock
Mountain Tactical bottom metal and LA magazine
Has aftermarket trigger spring and I cut away some of the trigger hanger bolt to allow lighter pull weight, doesn't affect trigger retention in the action
Will include direct mount Hawkins 30mm rings
Weighs around 10.4# with as it sits (scope is an LRTSi 4.5-18; rifle should weigh in at approx 8.75# with rings)
Round count is around 50
Scope is not included and not for sale separately
Buyer has first right to rcbs FL dies, brass (50 new PPU and about 45 once fired PPU brass, and factory ammo (95gr SST - 54 rounds). Also have 2 modified cases for the hornday oal gage
Threw a load together with 108 eldms and H100V last weekend. Couple targets below. The one measures about 0.65" - 4 shots (didn't include the pulled one by me) and the other is about 0.8" with 5 shots. 43gr averaged 3011fps and 43.5 averaged 3050. no signs of pressure.
I didn't get speeds for the 41 and 42 grains. Got to the range and found my battery to the chrono was dead. Range was charging it for me while I was shooting and was only able to get the speeds above after charging for a little bit.
Rifle, rings: $1850 split shipping
Tikka T3 action
Aftermarket LA bolt stop, shroud and bolt handle. Bolt is spiral fluted from LRI
25.75" Brux barrel (from muzzle to front of action; measures 0.600" at muzzle so a #2 contour)
no muzzle threads
8 twist
Manners EHTA stock - swamp camo - pic rail with cup up front, flush cup bottom rear and left side
Barreled action and bottom metal cerakoted a sand-esque color to match the stock
Mountain Tactical bottom metal and LA magazine
Has aftermarket trigger spring and I cut away some of the trigger hanger bolt to allow lighter pull weight, doesn't affect trigger retention in the action
Will include direct mount Hawkins 30mm rings
Weighs around 10.4# with as it sits (scope is an LRTSi 4.5-18; rifle should weigh in at approx 8.75# with rings)
Round count is around 50
Scope is not included and not for sale separately
Buyer has first right to rcbs FL dies, brass (50 new PPU and about 45 once fired PPU brass, and factory ammo (95gr SST - 54 rounds). Also have 2 modified cases for the hornday oal gage
Threw a load together with 108 eldms and H100V last weekend. Couple targets below. The one measures about 0.65" - 4 shots (didn't include the pulled one by me) and the other is about 0.8" with 5 shots. 43gr averaged 3011fps and 43.5 averaged 3050. no signs of pressure.
I didn't get speeds for the 41 and 42 grains. Got to the range and found my battery to the chrono was dead. Range was charging it for me while I was shooting and was only able to get the speeds above after charging for a little bit.
Rifle, rings: $1850 split shipping
