For Sale is the following...I prefer Zelle or PayPal for payment due to the amount and ease, or a USPS MO is an option if you don't have that service:
Barreled Action $800 shipped
Action $650 shipped
Barrel $175 shipped
1. Tikka T3 Stainless Action
-CTR Stainless flat rail.
-Factory trigger and spring, comes with retainer clip if you prefer standard metal and mags.
-CTR bolt stop.
-Standard bolt with .473" standard bolt face and polymer shroud.
-Round count 120.
-Factory action screws included.
2. Tikka CTR 6.5CM 24" Barrel
-Approx. 500 rounds..
-Factory blued finish, I dipped the muzzle in CLR to dissolve carbon, lesson learned on that thus the segment of bluing removed at muzzle, although I kind of like the look. There's also some minor finish streaking at the breach from cleaning the barrel tenon.
-Includes factory thread protector.
-5/8-24 muzzle thread.
The barreled action was properly torqued with an inside action wrench/torque wrench and headspaced with Go/No Go gauges and they mated up perfectly. Militec-1 anti-seize was used on the barrel tenon and all mating surfaces were thoroughly cleaned and de-greased prior to installation. I'll break them back apart if needed to sell separately. I also lightly heated the receiver to initially remove the rail to verify there was no corrosion, cleaned the mating surfaces and reinstalled the rail with blue Loctite and torqued the fasteners to 25 in/lbs. If you decide to install a 20MOA rail you won't have the typical hassle of breaking the factory epoxy bond between rail and receiver.
Barreled Action $800 shipped
Action $650 shipped
Barrel $175 shipped
1. Tikka T3 Stainless Action
-CTR Stainless flat rail.
-Factory trigger and spring, comes with retainer clip if you prefer standard metal and mags.
-CTR bolt stop.
-Standard bolt with .473" standard bolt face and polymer shroud.
-Round count 120.
-Factory action screws included.
2. Tikka CTR 6.5CM 24" Barrel
-Approx. 500 rounds..
-Factory blued finish, I dipped the muzzle in CLR to dissolve carbon, lesson learned on that thus the segment of bluing removed at muzzle, although I kind of like the look. There's also some minor finish streaking at the breach from cleaning the barrel tenon.
-Includes factory thread protector.
-5/8-24 muzzle thread.
The barreled action was properly torqued with an inside action wrench/torque wrench and headspaced with Go/No Go gauges and they mated up perfectly. Militec-1 anti-seize was used on the barrel tenon and all mating surfaces were thoroughly cleaned and de-greased prior to installation. I'll break them back apart if needed to sell separately. I also lightly heated the receiver to initially remove the rail to verify there was no corrosion, cleaned the mating surfaces and reinstalled the rail with blue Loctite and torqued the fasteners to 25 in/lbs. If you decide to install a 20MOA rail you won't have the typical hassle of breaking the factory epoxy bond between rail and receiver.
Attachments
-
20220419_142141_resized.jpg352.3 KB · Views: 161
-
20220419_142241_resized.jpg340.2 KB · Views: 158
-
20220419_142340_resized.jpg296.7 KB · Views: 148
-
20220419_142407_resized.jpg413.3 KB · Views: 138
-
20220419_142424_resized.jpg237.6 KB · Views: 132
-
20220419_142446_resized.jpg365.1 KB · Views: 123
-
20220419_142523_resized.jpg126.1 KB · Views: 124
-
20220419_142535_resized.jpg201.6 KB · Views: 117
-
20220419_142610_resized.jpg227.6 KB · Views: 111
-
20220419_142621_resized.jpg120.3 KB · Views: 125
Last edited: