TIKKA STOCK RATTLE CAN

[SierraNVplgrm]

Decided to rattle can the factory tikka stock. Pretty simple, I like how it turned out. followed some older threads on here.
1. scuffed up stock with 120 grit
2. cleaned with denatured alcohol
3. self etching primer in an olive green color
4. coated it with krylon Camo olive green
5. dipped and sponged on some more Krylon Camo in tan and brown

 

[HandgunHTR]

Nice job! I have a T3x in 6.5 Creed that is probably going to get the rattle can treatment here real soon.

 

[SierraNVplgrm]

Nice job! I have a T3x in 6.5 Creed that is probably going to get the rattle can treatment here real soon.

Thanks! Get after it send me a photo when you’re done.

 

[Beaverdog]

looks good. Finish it off with some 2k matte clear. It's a two part aerosol that dries rock hard and will really protect your paint job underneath.

 

[SierraNVplgrm]

looks good. Finish it off with some 2k matte clear. It's a two part aerosol that dries rock hard and will really protect your paint job underneath.

Yes sir I forgot to add finished out with a few coats of matte clear!

 

[darcytribe]

Looks good! Where did you purchase the etching primer and what brand was it, thanks!

 

[keystone112]

Nice work. I like it and would be happy with that on my Tikka.

 

[Tim in Wa.]

Nice work

 

[bojangles808]

looks good nice job

 

[Harvey_NW]

Nice job, did one the same way myself.

 

[Unckebob]

looks good. Finish it off with some 2k matte clear. It's a two part aerosol that dries rock hard and will really protect your paint job underneath.

This ^^^

 

[SierraNVplgrm]

Looks good! Where did you purchase the etching primer and what brand was it, thanks!

Rust oleum Lowe’s had it!

 

[SierraNVplgrm]

Nice job, did one the same way myself.
View attachment 540506

I dig that!

 

[mslater]

Looks cool - I like the reserve you demonstrated

 

[SierraNVplgrm]

Looks cool - I like the reserve you demonstrated

Thanks