Tikka D18 barrel Contour

[Gila]

Barrel maker wants to copy the Tikka D18 barrel Contour. I have a stock that has the inlet for the D18 barrel, but I don’t have a D18 barrel to copy. Does anyone have the barrel contour dimensions or know where I could get the dimensions? Thanks in advance.

 

[amassi]

I can go out and measure. What diam do you need?

Sent from my SM-G991U using Tapatalk

 

[Gila]

I can go out and measure. What diam do you need?

Sent from my SM-G991U using Tapatalk

That would be awesome! Thank you!

Don’t need to measure B. I need These other dimensions though:

https://kriegerbarrels.com/contours#sptr

 

[amassi]

A- 1.1230
C- .730
D-23.765
E 24.300

Sent from my SM-G991U using Tapatalk

 

[Gila]

Thanks a bunch! Happy Holidays!

 

[BAKPAKR]

@Gila, did you get your barrel yet, and, if so, how did it fit? What barrel maker did you use?

 

[Gila]

@Gila, did you get your barrel yet, and, if so, how did it fit? What barrel maker did you use?

No, I didn’t get the barrel yet. I did draw up the Tikka D18 barrel contour and they accepted it, so waiting on the barrel. Actually the barrel is supposed to be completed and with their gunsmith to install on my action. I went with McGowen because their price for a custom barrel contour is quite reasonable. If it fits the stock ok, I will send you the Tikka D18 contour drawing if you want it.

 

[Gila]

@Gila, did you get your barrel yet, and, if so, how did it fit? What barrel maker did you use?

Received the barrel…..The D18 contour fits like a glove! Thanks all for helping me out with the drawing!

 

[DangerRanger]

What does the d18 weigh?

My lite is about 4 ounces ish from balancing perfect I think

 

[Gila]

i don’t know…I didn’t weigh the action before the ‘smith screwed on the barrel. It is between a medium and heavy contour. I have 8 spiral flutes though which takes a couple ounces nmore off than the standard straight flutes. Points well, very nicely balanced.

 

[Wilehunting]

Sorry to hop on this thread but here’s my story and I feel it’s pertinent. Not fully knowing about the Tikka D18 contour I started my project. I sent a T3 barreled action in 270 to McGowen barrels to be rebarreled to 280ai along with a new Ember stock with the idea, intention and instructions to have the barrel contour to match the inletting of the new Ember stock and fluted like the factory Ember barrel. I received the new Ember stock back from them a week later. After a few months and paying the balance I received the barreled action. The contour matched the old barrel. So suffice it say, the barrel channel is very well free floated. I purchased several components from J&A Outdoors and I emailed him today about my experience and to help me clarify what happened in this situation. Wes, informed me about the D18 contour that Tikka uses on the Ember. Needless to say, I wish I knew about the D18 contour nine months ago and perhaps if I informed McGowen to do my barrel in the D18 contour instead of the way I did it, my project would be the way I wanted it done.

 

[Gila]

They will match the contour of the barrel they take off if you don’t specify a barrel contour for the new barrel. If the barrel contour that you want isn’t something they can copy, then they need a drawing for the custom contour. Having said that, they should have contacted you if they didn’t have a drawing that they could use. Their customer service, how should I say, leaves much to be desired. At least you have a lighter barrel. You can get the Stocky’s carbon VG for your lite barrel contour. In fact they are running a special discount right now: Use coupon code 30rokslide to take 30% off

 

[Wilehunting]

They will match the contour of the barrel they take off if you don’t specify a barrel contour for the new barrel. If the barrel contour that you want isn’t something they can copy, then they need a drawing for the custom contour. Having said that, they should have contacted you if they didn’t have a drawing that they could use. Their customer service, how should I say, leaves much to be desired. At least you have a lighter barrel. You can get the Stocky’s carbon VG for your lite barrel contour. In fact they are running a special discount right now: Use coupon code 30rokslide to take 30% off

You know what they say about “hindsight “, although I did try to be thorough with my instructions without actually knowing the exact dimensions of the proper barrel size.

 

[Killer Bee]

No, I didn’t get the barrel yet. I did draw up the Tikka D18 barrel contour and they accepted it, so waiting on the barrel. Actually the barrel is supposed to be completed and with their gunsmith to install on my action. I went with McGowen because their price for a custom barrel contour is quite reasonable. If it fits the stock ok, I will send you the Tikka D18 contour drawing if you want it.

@Gila Is there any chance you still have the Tikka D18 contour drawing you can send?

 

[Alpha Echo]

@Gila I'd like to get that D18 contour drawing too, please. I'm leaning towards a heavier barrel for my tikka t3 action once I burn my 243 barrel out.

 

[walk2112]

Anybody know the depth of the flutes on the D18 contour Roughtech barrels? Been looking around on here and striking out. Assuming they're uniform in depth more or less from the OD of the contour/profile, but if not... I'm trying to figure if a 300 win mag D18 barrel has enough diameter at minimum (the belly of the flute) for 5/8" threads at 20" length. Thanks

 

[HandgunHTR]

Anybody know the depth of the flutes on the D18 contour Roughtech barrels? Been looking around on here and striking out. Assuming they're uniform in depth more or less from the OD of the contour/profile, but if not... I'm trying to figure if a 300 win mag D18 barrel has enough diameter at minimum (the belly of the flute) for 5/8" threads at 20" length. Thanks

It does. I believe that there is a pic of someone who cut and threaded one a while back.

 

[PapaSmurf]

Received the barrel…..The D18 contour fits like a glove! Thanks all for helping me out with the drawing!

Hey man! Do you have that D18 contour drawing? Thanks!