Tikka CTR 24” barrel question

[RyanT26]

Does the Tikka 24 inch threaded CTR barrel still have enough of a shoulder to use a suppressor without issues?

 

[wind gypsy]

Yes.

Why would they put threads on it if they weren't useable?

 

[RyanT26]

Valid point. I thought at one time, thunderbeast ( maybe) recommended a minimum OD of .725 for 5/8x24 to allow for a minimum usable shoulder.
So I guess my question should’ve been is the outside diameter on a Tika CTR barrel at 24 inches still .725

Just looking at the CTR for an entry PRS gun.

 

[waspocrew]

Perfectly fine. My brother has a 24” CTR with suppressor. No issues whatsoever.

 

[wind gypsy]

Valid point. I thought at one time, thunderbeast ( maybe) recommended a minimum OD of .725 for 5/8x24 to allow for a minimum usable shoulder.
So I guess my question should’ve been is the outside diameter on a Tika CTR barrel at 24 inches still .725

Just looking at the CTR for an entry PRS gun.

It's larger than 0.725. That is more of a guideline than a hard rule though. I've shot a fair bit suppressed with 5/8 threads and 0.70' shoulder, no issue. Pretty sure most seekins sporter contours finish at 0.70, 5/8 threads.

 

[schmidty3]

Been running a ctr with tbac since ~2017