Tikka 7mm prc

[Isaaccc11]

Looking at tikka for 7mm prc wanted to see if anyone had any results with it! Thanks !

 

[ReddingArcher]

I have one that I dropped in an XLR folding chassis. I have maybe 50 rounds through it so far and it’s shooting ok, not spectacular but reasonable. It shot the Hornady CX terribly, the match loads were much better and this morning I shot some Barnes LRX which shot roughly 1.5 moa. I’m probably done messing with it until after the season ends and I’ll try some hand loads in it.

 

[.284reaper]

Looking at tikka for 7mm prc wanted to see if anyone had any results with it! Thanks !

Got mine finished up a month or 2 ago. Rokstok and Nightforce nx8 with some other UM parts. Didn’t have time to work a load up for this year but have had great luck with the Hornady 180 match. Things been a tack driver for me so far.

 

[tnblaster]

Does anyone have any experience with the T3X Laminated Stainless Grey 7mm PRC 22" Barrel JRTXG37122MT? I think I've narrowed it down to this model for my purchase but I'm still a little concerned with it listed at 1:9 twist. I know a lot of these new tikkas say that and it's a typo but I can't find anything else on this one. I'm afraid the superlite would just be too light. I like the 22 inch barrel better over the 24. If I decide that it's too heavy once I add my heavy scope, I can always have the barrel and bolt fluted, for a reasonable price. Just looking for any feedback on this laminated model.

 

[.284reaper]

Does anyone have any experience with the T3X Laminated Stainless Grey 7mm PRC 22" Barrel JRTXG37122MT? I think I've narrowed it down to this model for my purchase but I'm still a little concerned with it listed at 1:9 twist. I know a lot of these new tikkas say that and it's a typo but I can't find anything else on this one. I'm afraid the superlite would just be too light. I like the 22 inch barrel better over the 24. If I decide that it's too heavy once I add my heavy scope, I can always have the barrel and bolt fluted, for a reasonable price. Just looking for any feedback on this laminated model.

Mines the same except a 1:8. shoots 180 hornady match and 180 Berger hand loads under 1moa. The mags kinda suck would definitely get UM bottom metal or something. Trigger spring too

 

[tnblaster]

Thanks, that's what I'm hoping is that the ad is wrong and it's actually a 1:8. I think that's the case with all of them, hopefully. I'm just going to call Beretta tomorrow and get them to confirm before I order it

 

[minas stiris]

Hornady 180 eldm has been about 100 fps slower than what on the box in my wife’s 24 inch 8 twist Bart barrel. I haven’t had a box since the first batch that’s been close. Also es in a box of 20 has been around 38-45.