Tight Spot Quiver Quaestion

[Oilfieldmiller]

The rubber insert at the top of the quiver has loosened over time and is now falling out if there are no arrows in quiver holding it in place. Also has a noticeable vibration (noise) when shooting.

Was thinking a few dabs of glue around the lip would do the trick but wanted to see if anyone had a better solution or fix for this. Didn’t want to glue it and still have the noise and have to rip it back apart.

Thoughts?


Sent from my iPhone using Tapatalk

 

[Trial153]

The newer models have a screw that holds it in with a clip. Works well. Call them up I am sure they can get you the hardwear . It’s a 5 minute install if that.

 

[fatlander]

I’ve glued them before just like you’re talking about. Worked flawlessly.


Sent from my iPhone using Tapatalk

 

[Oilfieldmiller]

Thanks for feedback. I’ll try to glue the lip on and check to see if I have any noise issues.


Sent from my iPhone using Tapatalk

 

[JDZ]

I never got along with that cheesy piece of rubber Tight Spot puts in there. I've replaced the rubber with a piece of foam. A piece from packaging or a couple layers from dollar store flip flops works well.

 

[Oilfieldmiller]

Glue worked great. Thanks all.


Sent from my iPhone using Tapatalk

 

[few907]

Just curious what kinda glue did you use? Just regular old super glue?