Thinking about a 7 Saum

I have one. I thought I was going to switch to a 7prc for factory ammo support when needed. But found that the 7prc hand loads were slower than my saum while burning 6gr more powder. I don’t understand it, but decided to stick with the saum.

Actually considering a 6 or 25 saum barrel as well for a bit less recoil.
 
I have one. I thought I was going to switch to a 7prc for factory ammo support when needed. But found that the 7prc hand loads were slower than my saum while burning 6gr more powder. I don’t understand it, but decided to stick with the saum.

Actually considering a 6 or 25 saum barrel as well for a bit less recoil.

Id consider that a barrel issue, not the cartridge.

Both are great imo.
 
Op, I've had both running 180 hybrids from a 22 inch barrel with H1k.

I liked the saum but like the prc just a little better. With 180s I was stomping on the brass to get 2840. Im running the prc at 2920 and well off of pressure. Both with ADG brass.

I was running a .195 freebore on the summit otherwise you really loose powder capacity with heavies. This requires a long action.

Both were very easy to load for.

Bonus, Lapua will be making prc brass soon.
 
7 SAUM is a great round. Really enjoy shooting mine. Gunwerks has ammo in their outlet shop for $45/box to get you started.




Snapseed.jpeg
 
What action are you thinking? Bullet? Barrel length?

I have a tikka in the long action configuration with the 180 vlds seated out. Getting 2820 in a 20". Very happy with that gun.

I think a 700 short action works ideally for 168s but you have to seat deeper than a person would like for the 180s. IIRC the 7 Sherman short was made for 180s in a short action if that's how you wanted to go.

Really like my saum, would do it again!


Sent from my iPhone using Tapatalk
 
I like my 7 SAUM and it is short action with 24" barrel. Shooting the 168's at 2900. If I was going to build it again, I'd go with a medium or long action for the 180's.
 
7 SAUM is a great round. Really enjoy shooting mine. Gunwerks has ammo in their outlet shop for $45/box to get you started.




View attachment 951160
Dang, that's a hot tip. Have components aplenty to kill this barrel but couldn't help but buy some to try. Any idea what the COAL is on the 180 ELDs? Their site says it may be too long for some rifles and to review the COAL listed, but it's not listed. Mine is designed around that bullet so i have no concern but just curious.
 
Dang, that's a hot tip. Have components aplenty to kill this barrel but couldn't help but buy some to try. Any idea what the COAL is on the 180 ELDs? Their site says it may be too long for some rifles and to review the COAL listed, but it's not listed. Mine is designed around that bullet so i have no concern but just curious.

I’ll have to check when I get home, the 180 ELDM shot awesome though.

Here’s two consecutive 5 shot groups with the 180 ELDM, followed by 180 Hybrids:
IMG_6559.jpegIMG_6560.jpeg
 
Back
Top