The slow barrel tikka dilemma

[Brandon_SPC]

That extra space is more room for powder or pressure anyhow. You might be able to make them extra fast, especially if you fireform, necksize, and load. That's what I'm trying with my new 223ai barrel. The trick of course is assuring good extraction when you need a backup shot...

People still neck size? I always fill length size and only bump the shoulders back .003.

 

[Fireflyfishing]

People still neck size? I always fill length size and only bump the shoulders back .003.

Yes, we still neck size. I neck size new brass until it starts to get tight in the chamber…then I start full length sizing for remaining life of the brass.

 

[TradLife406]

Tried handloading for the 156? I was spanking those out at 3k and change with a 24" and a Berger max charge of 570.

I don't have much experience with oem tikka barrels. But my 223 is doing 2830 with 77 tmks and a max charge of n140. Which seems pretty dang good. Barrel is still new too.

Easy button for more speed over the 6.5 is going to the 6 UM or a faster round. Why I sold my 6.5 for a 6 UM. Shorter barrel but still getting over 3k. Ok easy, but not very cost efficient

 

[Fireflyfishing]

My preference is to keep 1800fps to 1000yds for my application and environmentals for this rifle in particular.

Which is what? Shooting animals or targets at 1000 yards?

 

[DangerRanger]

All of my tikka barrels have been a touch slow, none of them sped up and made that ground back reloading.

Ive just tossed it up to the price you pay for easy cheap accurate and long lasting takeoffs. Its not worth 500$ more for 50-100 fps for a custom barrel to me for anything aside from my comp gun

My 24” PRC is 2795 with factory 147
My 16” creed is 2600 with a 130tmk with the same load people on here claim 2700
I had a 20” ctr that was like 2550 with factory 147s

 

[HNTR_NW]

Which is what? Shooting animals or targets at 1000 yards?

Targets mostly, but the retained velocity to 1K for hunting is a personal preference for this rifle.

All of my tikka barrels have been a touch slow, none of them sped up and made that ground back reloading.

Ive just tossed it up to the price you pay for easy cheap accurate and long lasting takeoffs. Its not worth 500$ more for 50-100 fps for a custom barrel to me for anything aside from my comp gun

My 24” PRC is 2795 with factory 147
My 16” creed is 2600 with a 130tmk with the same load people on here claim 2700
I had a 20” ctr that was like 2550 with factory 147s

I have one batch of reloads running 147s over 56.5gr of retumbo that’s giving me 2780fps. It’s about 2gr under max I believe. Once my next batch of brass is shot I’ll try bumping it up. And maybe try and find some N565- it looks like guys have been having luck with that

 

[Turkeygetpwnd38]

I’m not saying your tikka isn’t slow but hornady factory loads are always way slower than advertised. Even out of a 24-26” barrel I rarely get within 50-100fps of advertised. The only factory ammo I’ve shot that is consistently close to published is federal.

 

[DangerRanger]

Targets mostly, but the retained velocity to 1K for hunting is a personal preference for this rifle.

I have one batch of reloads running 147s over 56.5gr of retumbo that’s giving me 2780fps. It’s about 2gr under max I believe. Once my next batch of brass is shot I’ll try bumping it up. And maybe try and find some N565- it looks like guys have been having luck with that

That sounds pretty decent. As long as you get your max yardage needed for on game terminal velocity the wind difference between 2800 and 2900 isn’t much