Suppressors

[wind gypsy]

Assuming a fast 7 - Rem Mag or PRC - What suppressor would you guys say would offer the most sound suppression - and ultra 7, or a Scythe ?

Easy, nomad Ti XC

I wouldn't be surprised if the Ultra 7 edged the scythe slightly in strict Db measures. Its longer, heavier, and more expensive though. I have a g1 U7 and a scythe but dont care enough to swap them around on the same rifle to try to compare. They are close enough.

 

[Lawnboi]

Assuming a fast 7 - Rem Mag or PRC - What suppressor would you guys say would offer the most sound suppression - and ultra 7, or a Scythe ?

I’d want a bigger suppressor for that much powder.
Unless you’re keeping the barrel long.

Everything is a trade off with suppressors.

 

[Joshua2639]

In my mailbox today.

View attachment 794740

I did the by one get one with a banish 30 gold.
I don't hear much about the free one banish 22k-V2, but what I have heard is not in the same class as the other banish suppressors.
Anyone here have experience with the banish 22k-V2?

 

[270quest]

I’d want a bigger suppressor for that much powder.
Unless you’re keeping the barrel long.

Everything is a trade off with suppressors.

Im thinking a 22" barrel, possibly 20 - that why 6-7" high end titatium suppressors make the most sense to me...

I have a backcountry Banish which did great on my sons 6.5 creed with a 21" barrel, just want to take up the suppression ability for one that will go on a magnum 7.

 

[Mtelkslayer94]

Anybody know where I could get a scythe ti at the moment? Might have changed my mind.

 

[Tahoe1305]

Haven’t looked if they are in stock at the moment but have been Bauer precision with a discount code is tough to beat.

 

[Lawnboi]

Im thinking a 22" barrel, possibly 20 - that why 6-7" high end titatium suppressors make the most sense to me...

I have a backcountry Banish which did great on my sons 6.5 creed with a 21" barrel, just want to take up the suppression ability for one that will go on a magnum 7.

I’d want a 6-7” on a 22” barrel.

If willing to go shorter, like 18” I think a bigger suppressor does cut down on more recoil.

 

[06 SB]

I am thrilled with my Resilient Jolene S. I also have a DD Enticer STi and a DTF 8.6 STi as well. DD is about 19 weeks out if you order one. They might be in stock somewhere though.

 

[Josh Boyd]

Anybody know where I could get a scythe ti at the moment? Might have changed my mind.

I just bought one this week at Extreme Tactical in Kalispell. They had a few in stock as well as the tbac Ultra 7.

 

[BBob]

Anybody know where I could get a scythe ti at the moment? Might have changed my mind.

I've been watching dealers regularly and haven't caught one until today when my local dealer somehow had one sitting there. I think you've just got to keep checking everywhere until one shows up. Super popular right now.

Oh and the Nomad Ti XC are awesome too
The DD Enticers are great for the $$$ with not much less performance than the Nomad. A stainless steel model is less than $500. I don't own one but probably will at that price.

 

[jtevanMT]

Aren’t people having welds fail on the scythe?

I had a weld fail on mine last weekend (after about 200 rounds on 7 prc). Quickly received a email with return authorization after submitting warranty claim (very good customer service so far). Waiting for either a repaired or new Scythe. Hopefully they will honor the warranty.

 

[Tahoe1305]

I am thrilled with my Resilient Jolene S. I also have a DD Enticer STi and a DTF 8.6 STi as well. DD is about 19 weeks out if you order one. They might be in stock somewhere though.

Diligent Defense Co. - Enticer S TI Silencer - Bare Mill Finish

Diligent Defense Co. Enticer S TI Silencer in Bare Mill Finish - Experience the ultimate lightweight performance with the titanium Enticer S TI Silencer.

www.bauer-precision.com

 

[HuntHarder]

If you guys were building a lightweight smaller profile barreled rifle, would you get the barrel you want and thread it 1/2x28 and use an adapter up to 5/8x24? Or would you just get a barrel with a larger profile (.700) at the muzzle? I am thinking the adapters look slick and will give it a nice shoulder and I will be able to get a smaller diameter barrel. Not sure if there are any negatives to the adapters I am not aware of.

 

[Raider4044]

If you guys were building a lightweight smaller profile barreled rifle, would you get the barrel you want and thread it 1/2x28 and use an adapter up to 5/8x24? Or would you just get a barrel with a larger profile (.700) at the muzzle? I am thinking the adapters look slick and will give it a nice shoulder and I will be able to get a smaller diameter barrel. Not sure if there are any negatives to the adapters I am not aware of.

If you want a light profile barrel, have your gunsmith machine an adapter or added shoulder directly on your barrel permanently.


Sent from my iPhone using Tapatalk